Here is a vehicle between yachting and airboat
On the video you can watch the cart that sometimes jumps, is when it encounters a small stone
There are 2 engine mounts which is 15 ° inclined to master the jumps of the tank which are caused by small stones
For steering and wheel spindles you will find parts of yachting
Layer thickness of 0.2mm - 1mm shell thickness
Temperature 220C °
The two square tubes are aluminum 10x10mm length 250 mm
The engine NTM Prop Drive Series 28-26A 1200kv (short shaft view)
The servo is for 9 grams here
The 3S LiPo battery 11.1V 1300mA
The wheels come from skating
The white sheath pin and serves to guide the steering linkage is 4mm
Here is a vehicle between sand yachting and airboat
On the video you can see the tank jumping sometimes, it is when it meets a small stone
You will find 2 mounts, one of which is inclined 15 ° to control the jumps of the tank which are caused by small stones
For steering and wheel axles you will find parts of the sand yacht
Realization in PLA
0.2mm layer thickness - 1mm shell thickness
Temperature 220C °
The 2 square tubes are made of 10x10mm aluminum with a length of 250 mm
NTM Prop Drive Series motor 28-26A 1200kv (short shaft version)
The servo used for steering is a 9 gram available here
The lipo battery of 3S 11.1V 1300mA
The wheels come from roller
The white sheath that serves as a pin and guide for the steering linkage is 4mm
Page translated by automatic translation. See the original version.
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!