Flexi Fat Meow with cute Paws 🐾

A Flexi Cat boasts elegantly articulated joints, a sophisticated position-locking mechanism, and a 360-degree turntable, enabling it to strike dynamic poses and achieve seamless, fluid rotations with grace.

Features

#360 Twisty Body
#Independently Turntable Legs and arms.
#Position Locking : Links can preserve position as you twist and turn.
#360 Turntable links.
#Scalable down upto 40%
#Recommended Size 50-60% if scaled down.
#🐾 Print and insert cute paw prints.

Access the Complete Model Gallery

Visit www.Mels3Dlabs.com to explore our design collection.

⚠️©️ COPYRIGHT NOTICE ©️⚠️

All our designs are protected by copyright. When you purchase, you are granted the right to download and print the design for PERSONAL USE only. You do NOT have permission to resell or redistribute the digital files, including any altered or "remixed" versions. Printed models cannot be sold without authorization.

To legally sell physical prints of our designs, you must obtain authorization by maintaining an ACTIVE monthly subscription to the "COMMERCIAL DESIGNS" tier on our Patreon: www.patreon.com/Mels3D

Feel free to post a make or tag your print images on our Instagram. If your post is especially impressive, we might even make a feature post and tag you **: www.instagram.com/mels3d

Follow Mels 3D LABS for more
https://mels3dlabs.blogspot.com

⚠️ Note⚠️
If Slicer errors and warnings appear, they should be ignored as they are part of the reverse engineering protection. Models will slice and print correctly despite these warnings and errors. Be sure to check the slicing preview to confirm a successful slice.

⚠️ Note ⚠️
The 360 Links on MELS 3D LABS design result from extensive proprietary research over a year and are protected by Copyright. Any attempt to copy, replicate, or remix this feature will be addressed legally.

EXPLORE our other MODELS

MELS3DLABS

Dragonfly V3 Anniversary Edition

• 6.7k views
• 61 likes
• 101 downloads
• 7 collections
• 0 comments
• 1 make

Download US$ 4.13

MELS3DLABS

Robo Gorilla

• 2.1k views
• 10 likes
• 15 downloads
• 2 collections
• 0 comments
• 0 makes

Download US$ 2.36

The demo was printed at 50% scale without supports and with a brim. However, adding slight support for the chin might improve the surface finish.

1. Layer Height: 0.12-0.15mm for best surface finish.
2. Scalability: Scalable down to 40%. Recommended size is 50-60% if scaled down.
3. Infill: 15%.
4. Brim/Support: Minor brim or support might be required depending on layer height.
5. Fit Adjustment: If plugs are loose, scale them up by 1.5% or apply glue to the tip before installation.
6. Washers: Install the appropriate washers as per the file name of the plugs; washers go into the slots in the plugs.

Notes
1. To achieve even tighter links, disable uniform scaling and increase the Z height of the washers by 2-3% before printing.
2. Print extra washers to have replacements on hand, as joints may wear out after months of use. Using PETG instead of PLA for the plugs and washers can also extend the life of the joints by three times.