Skip to content

Ankly Robot - 3d Printed Assembled

3D model description

Articulated Robot design. His name es Ankly
It is printed articulated, without need of later assembly.
A challenge for your printer, you must adjust it well to be able to print it since the tolerances for the joints are minimal.
Once printed it is necessary to review and remove the small supports of the piece.

You will find two files one at 100% in size and another at 80%.
( 100% size it is easier to get good results)


3D printing settings

Rafts: No
Resolution: 0.2mm (size:100%) 0.16mm(size 80%)

Infill: 20% (to 100% size) 40% (to 80% size)

To print at 80% of its size, I recommend choosing file "80 little puppet Ankly.stl"
Layer Height: 0.16mm
Wall thickness: 1.2mm
Infill density: 40%
Wall speed: 35mm/s
Infill speed: 60mm/s

  • 3D model format: STL



Followers 243 Following 2
Downloaded 6477
Sales $839

I was born in Madrid, Spain. I started drawing and modeling in my early childhood. I studied Fine Arts at the University of Madrid (Complutense). I specialized in sculpture and went on to study modelling and ceramics in in Madrid Ceramics School. I worked as a graphic designer for eight years and then as an illustrator for several years. I am also a sculptor and like create articulated dolls. I invite you to see my website ​



Similar 3D files

Add a comment


Mes réglages sont pas optimiser donc les pivot sont bloqué dommage et je viens de lire pour une taille de 80% il fallait une couche de 0.16 moi je régler 0.2 sa peut surement être l'un des causes