Goalzero LED Lantern Louvered Shade
- 382 views
- 0 likes
- 0 downloads
3D model description
Shade Specifically Designed for the Goalzero Lighthouse 400
It helps to cast down the light to help reading maps and seeing what is on the camping table without blinding everybody.
This is the first time I ask for money for my design work, and it is sort of an experiment to see if I could use this to generate a little revenue.
I will appreciate feed-back! Thanks.
3D printing settings
Walls: 2 shells.
Top and bottom: 5 and 4 layers.
Infill: grid at 20%.
Layer height: .2 mm.
Each louver prints in about 1 hr on a Prusa MK3, so I would assume about 7hrs of print time for 6 louvers and the top adaptor plate.
I recommend some translucent PETG, but I assume that most plastics will Work.
In the picture it is eSun Transparent Orange PETG, and Overture light gray PETG.
The parts should snap together and require no hardware, but there is a through hole in case a long screw or threaded rod is desired.
This model will not require supports; the steepest overhang is 45 degrees.
- 3D file format: STL
- Publication date: 2020/07/31 at 22:39
I believe 3D printing and design sharing can reduce the environmental impact of product packaging and shipping, save countless hours of engineering time, and accelerate innovation.
...and it is a lot of fun!!!
Best sellers of the category Gadget
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!