Foldable Willys MB Jeep

Through this folding Willis MB Jeep, I made my first convertible car. The convertible car requires a lot of work as it is necessary to make a chair and interior, and there is little space to put the structure. In this work, I found it very difficult to make a convertible car by folding it.
This time, I inevitably adopted a way to separate the wheels. And some parts were printed and attached separately. The hood can be opened and closed, and the windshield can be rotated forward. The wheels also roll very well.

The folding process is as follows.
1. Rotate the front part of the jeep and turn it over.
2. Connect the lower body to the upper body.
3. Close the hood and move the windshield forward and tilt it back.
4. Press and fit each of the four wheels.
5. Put the fuel tank base on the back and put the fuel tank on top.
6. Attach the spare tire to the rear of the vehicle.
7. Cut the filament to a length of 18mm, fit it on the steering wheel, and apply adhesive to the front hole of the driver's seat.

Check youtube videos about folding process below.

=======================================

▣ You can download SAME at https://fab365.net/items/199

There are many other designs at fab365, some EXCLUSIVE.
And if you become a Fab365 member, you can get awesome FREE items and get PRIORITY purchases of new products.

=======================================
▣ Video Reviews

Print on Prusa i3 mk3 and folding process video ➪ https://youtu.be/z1olJYD9u1U
Print on Ender 3 pro and folding process video ➪ https://youtu.be/wv1DR15O0Io
Print on CR10s and folding process video ➪ https://youtu.be/bpK4WiZrkWc
Print on Twotrees Bluer and folding process video ➪ https://youtu.be/i2M_RWTR4Q0
Print and folding process video from greg ➪ https://youtu.be/wKVOVq5EJ9A

=======================================

▣ Printing Tips : https://fab365.net/print-tips-list

=======================================

1 : 32 scale

=======================================

PRUSA Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 2.4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 150% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 30%
Additions Raft : OK / Brim : NO / Support : NO
Ender Slicing Settings Simplify 3D
Extuder Nozzle Diameter : 0.4mm / Retraction Distance : 4mm
Layer Settings Layer Height : 0.1mm, 0.2mm / Top Solid : 8 / Bottom Solid : 6 / Outline : 2
First Layer Settings First Layer Height : 120% / First Layer Width : 100% / First Layer Speed : 50%
Infill Interlor Fill Percentage : 10% / Outline Overlap : 40%
Additions Raft : OK / Brim : NO / Support : NO