This is a Bird Feeder for little Birds.
It's design is inspired by Gothic Cathedrals :-)
Only small Birds can get in due to the small openings.
Now they have a save place to eat and if necessary they can escape trough one of the four sides :-)
Of course there is also a place for bigger Birds to eat.
They can go to the Tower on top. This Tower is a Seed dispenser. It can be filled by taking the Tower Roof off.
By turning the green ring it is possible to regulate the amount of Seeds coming out.
The Bird Cathedral is designed to stand on a floor or table, but it is also possible to hang it from a tree. Then the Birds are less worried about Cats etc. :-)
The green center floor can be taken out for cleaning purposes.
To bad that the drawings with the assembly directions are not shown fully on the site. Luckily they are also shown in the “manual.pdf “ included with the files. :-)
If you have any questions feel free to ask.
Do you think I made a mistake or forgot something feel free to inform me :-)
It is hard to give precise amounts of material used, but I mostly used these settings for my printers:
0,2 mm resolution /layer hight
4 top & bottom layers
3 wall layers (but for smaller peaces like the windows 2 wall layers)
infill 20% (but 15% is also possible for some parts)
Skirt 2 lines
So then you should need around:
White PLA around 2900 gram
Green PLA around 550 gram
PET-G around 10 gram.
Time....... I used mostly the settings:
print speed 38mm/s
wall speed 30mm/s
inner wall 30mm/s
travel 60 mm/s
initial layer 25mm/s
Retract distance 6,5 mm
(for some parts (like the tower top roof) I needed to turn the Feed rate back to 38%)
(print support is only used on “base center floor.stl”)
and that will take you to around 313 hours :-)
Yes I know, printing can be done faster :-) I just use more printers :-) Of course do what works best for you :-) this is just an example to give you an idea how long it will take.
Printers: Customs & Anets
Design Programs: 123D Design, Inkscape, MeshMixer
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!