Bird Feeder Gazebo style

This Bird Feeder is inspired by a Gazebo. It is winter time now and therefore the birds in your backyard will be very happy with it. If you put in some food, of course ;-)
This model is made to be super simple. Just print it and it is ready to go :-) Also print support material is not needed. This saves filament and time.
This Bird feeder can be hung up on a tree branch. For this it uses a rope. This rope is fed trough the hole on the top. On the end of the rope a knot is made so it can not come out. The diameter of the hole is 4mm.
This feeder is about 152mm high and has a diameter of around 110mm.
To see it in action with a mouse please see: https://www.youtube.com/watch?v=GBc0hfpd--I.
But if you do not like this size, you can easily scale it At 100% size it will take around 142 gram of filament with the settings: 0.4mm Nozzle, 0.2mm resolution, 2 wall lines, 4top/bottom layers & 15% infill. I tested this model on a FDM printer

Feel free to ask any questions, if you have any :-)

0.4mm Nozzle
0.2mm resolution
2 wall lines
4top/bottom layers
15% infill.