Crawler M939 4x4 Sideboard Flatbed 313mm 324mm- 1/10 RC body attachment

Printer minimum build volume required - 235*200*95mm

M939 cab is sold separately. This listing is for the flatbed only.

Remove all inner fenders before installing. Aftermarket standalone front and rear shock towers are required if your chassis uses fender integrated shock towers. Depending on chassis, horizontally mounted battery trays may have to be removed or relocated.

IMPORTANT note for TRX4 ONLY: Please use the included printed rear shock towers for correct installation.

The Gladiator version of the M939 flatbed made handling tighter spaces easier compared to the 6x6 flatbed. A major downside is that the chassis isn’t very common, so to make it more available for everyone we decided to design a shorter version of this bed that will fit the much more common SCX10 ii, VS4-10, and TRX4.

The bed’s sideboards come in 2 versions to fit 313mm and 324mm wheelbase for TRX4 builds. It is also ideally paired with a tyre to tyre width of 240mm, and 120mm diameter tyres.

Body mounts are included only for the SCX10 ii, VS4-10 and TRX4 chassis. This bed does not natively fit the SCX10 iii chassis. Modified or custom designed mounts are required for SCX10 iii builds.

The bed mounts separately from the M939 cab and is designed to be used with the lowered version of the M939 cab mounts.

Features and details included:
- Bed with battery access hatch is included. A bed without a battery hatch is also included.
- Compartment with magnetic lid for spare screws
- Scale fuel tank with fuel tank holding brackets
- Rear sideboard can open for easier cargo loading (the sides do not open)
- Functional hooks to strap down cargo
- Fully functional light buckets
- Intricate details and more!

Printing tip: If layer steps appear too big on parts, orientate them so they are slightly angled in the slicer before printing.

It is highly recommended to read the instruction manual before purchasing, to ensure you have all the required tools and hardware to assemble this body.

All files are for personal use only. DO NOT in any way redistribute, sell in physical or digital form, or use for AI purposes. Files are embedded with trademarks. Violations will result in immediate action without exception.

Assembly instructions:
View the link below to download the assembly instructions
https://www.aheadrc.com/manual

FDM printing:
PETG filament
0.2 layer heights
30-70% infill density
Supports are necessary