17 comments

No problem, it's approximately: Width & Depth: 10cm Height: 15cm, in its pre supported size. Obviously it can be scaled up if you don't mind modifying/supporting it, but going down may make it too delicate. Hope that helps.

Hi there, the set is 32mm so it won't look too out of place. You can reduce it by about 10% to get closer to what you want. However the violin strings are already quite small, you may experience a little bit of warping so keep your alchohol baths brief is the best advice I can give, and hit it with a hair drier to try and get the shape back if it does warp. Good luck.

Hi there, thanks for reaching out. The stage is about 6.4 cm wide by default and you wouldn't run into any problem scaling it up in your slicer. Just scale it up to 1.49 or 149% and that should make it roughly 9cm wide. Your slicer will be able to tell you exact numbers. If you're on resin printers you may need to adjust the supports slightly just to make sure there's plently of support at the initial connection point. Best of luck!

Hi there, thanks for your question. Unfortunately my models are intended for resin printers, I highly doubt you be able to get a satisfactory print of the model with an FDM printer. I'd be unable to test it as I only have resin machines, sorry.

No worries, which file specifically are you trying to open?

Sorry! My fault. Old sign maker here and I'm so used to CorelDraw I for got how to unzip files from other file types.
I have printed several of your barrels and they look amazing. Thanks

Yea sure, I must have missed that, It'll be up in 10 mins.

There you go, should be in the set now.

AWESOME SERVICE

I really need to get back on top of my social medias, I neglect them too much!

For 28mm just scale the model down to 90% in your slicer. The pre supported stl version should be fine and I'll make sure I added the lychee version. Then you can select all the supports in lychee and alt-R? I think it is to straighten the supports and you'll be good to go. The wagon wheels are already separate pieces so you can print them separately as many times as you want. I had a skaven warband when mordhiem was first released. Awesome games.

oh wow really? nice!!! Ive been getting all my stuff together. im looking for more variations of terrain, are you or can you make more things?

I put out a set with one character and a set of supporting terrain each month, Next month I'm making a set of ruins and a minotaur/beastman. Might work for mordhiem. If you have any suggestions though I can see if it'd make a good patreon release in the future.

Hi there, I'd recommend downloading/opening blender, then just file> import> stl. Then file export > wavefront obj and you'll have your obj in a snap.

Yea, should be easy enough, I'm a little swamped at the minute. But I can look at supporting larger versions come February.

Yea, needed a spear to kitbash onto a boss monster for tomorrows game night. Nice work on yours.

Thank you! Also, have to mention, because I was asked again. The spear is handle is made of great wurm spine, it is meant to be curvy - it will not be print missproduction]