15 comments

Could you please clarify which model this is about? I don’t use Cults3D and don’t publish here myself — Cults3D does that automatically for me. I’m not entirely sure how to check here which model this comment refers to, so it’s hard for me to respond. It feels like it’s not working, but it’s difficult to understand exactly what it is.

This is the file "Germination_Station_Bottom.STL"

Have you ever managed to print it in filament?

Watering should run for 1–3 minutes every 15 minutes — that’s for the growth stage. For germination, it’s usually done in a separate container. Take a look, I published another model specifically for that purpose.

Hi RandyinItally2 ,
Could you tell me if you printed it in filament or resin, and if filament could you give me the configuration of the printing software, because I have problems with the tray of the germination kit, it prints completely full...

Hi.

I assume you meant a GT2 pulley with a set screw that fixes it to the shaft of a NEMA stepper motor. Just clarifying, because the term “worm screw” usually refers to a worm gear mechanism, which doesn’t really apply here.

As for the pulley itself — I can make one to order if you need it. I just need exact specifications, because asking “do you have a pulley” is a bit too abstract — kind of like asking “is there life on Mars.”

Hahaha, of course you're absolutely right. I was asking this as a first step; you already had something developed. Let me tell you my intention. I'm implementing a Mercury One from the ZeroG project and I'm looking at the towers that support the motors that move the X/Y axes of the CoreXY.
The motors have GT2 20T 5B 6W pulleys, but they hang in the air, and when a tension is applied that exceeds the motors' capacity, their shafts bend. To solve this, you can buy motors with long shafts and install a bearing at one end (the motor towers have the space for it) and achieve improved resistance to belt tension.
Since I don't have long-shaft motors, I'm looking at alternatives, and it occurred to me that I could implement a pulley that is fixed to the shaft and long enough to accommodate a bearing at the free end and generate the improvement I'm talking about.
If it's possible, what's the ordering process and what would the costs be? do we contact each other by direct message?

At this point, I had other printers that I use now. I just don't remember what the settings were. But there were no problems when printing.

Links in description https://www.thingiverse.com/thing:6200295

Hmm, the link leads to a 404 error: "You have reached the end of the Thingiverse there is nothing awesome here..."

https://www.thingiverse.com/thing:6213833

Merci

https://www.thingiverse.com/thing:5777742
https://www.thingiverse.com/thing:4283986

Si nous parlons de ces porte-bobines, alors ils sont universels. Autrement dit, ils conviennent à n'importe quelle bobine. Liste des pièces sur les pages publiées.

Je ne peux même pas imaginer si la traduction a été faite correctement, car je ne connais que bonjour et merci en français :)

bonjour, tu parles de quel modèle ? le fait est que ce site publie automatiquement mon contenu posté sur https://www.thingverse.com/perinski/designs et quand vous me posez une question ici, je ne vois même pas le modèle que cette question concerne

Hola, accidentalmente vi el mensaje. La publicación aquí es automática. Estoy publicando aquí: https://www.thingiverse.com/perinski

Abrazaderas universales para pcb con imanes aquí: https://www.thingiverse.com/thing:3429201
para series grandes imprimo alojamientos individuales