39 comments

m3.penta@gmail.com

Hi, can i get you email, thanks ☺️

Hi, I would like to recreate the extruder and looking at the files provided, there doesn't seem to be a list of materials or an assembly manual. Would it be possible to have one?

Bonjour , j'aimerais savoir si il serais possible de vous contacter en privé pour une petit demande sur un de vos objet 3d l'adapté si besoin je payerais sans souci , merci d'avance a vous

Bonjour,
Pourriez-vous m'expliquer comment fonctionne votre échelle de réglage ds pendules 400 jours ainsi que la pince ?
Merci.
Cordialement.

Bonjour, faites vous toujours votre projet de sélecteur de filament ?

I really like the design of The Simple. I think I will have to give it a try.

I am currently working on the design here: https://cults3d.com/:141293. I am currently setting up the electronics. https://youtu.be/m9Os2xgqGZI?si=x1DMUn7mYeSyZAHc I have an extra PCB of their design if you'd be interested. I'd gladly send it to you for free. Email me if you're interested. bruce.howard.job@gmail.com

I am also a retired military, electronics technician, only from the USAF. I spent some time at Falconara AB back in the mid 90's. Glad to see you're still solving problems and creating things!

hola muchisimas gracias por tu aporte de drag knife cnc-drag-knife-mk3 qusiera saber que resorte utilizas
uchisimas graciasss

Hi, Thank you for the design. Do you think you can share your vat model please? I m trying to design a easier handle for it. Thank you either way.

Bonjours Francesco,

J'ai acheter votre graveur laser "PETIT GRAVEUR LASER (évolutif)" et merci pour le super design, je l'ai acheter parce qu'il me plait bien et il y a plein de petit trucs franchement génial, par contre, votre graveur est en 2040 et moi je n'est que des 2020 je me demandais si vous étiez en mesure de le changer en 2020, Sinon je peut le faire sans problemes, mais je ne le ferais jamais sans votre consentement, et soyer sur que c'est pour mes besoins seulement. merci beaucoup de m'avoir lu, en espérant avoir de vos nouvelles bientot,

hola disculpa vendes el programa para la programacion del erduino?

I didn't find the original BOM, but the parts needed should be:

• n. 1 Arduino Uno + Arduino CNC shield v. 3.0
• n. 1 ATmega2560 + RAMPS 1.4
• n. 4 Nema 17
• n. 1 TB6660 driver (optional)
• n. 1 SSR relay VDCin-VDC-out 20A
• n. 1 spindle motor OD 52mm, 200W or more, 12-24VDC
• n. 1 Chuck Holder ER11 8mm collet
• n. 1 spindle collets set 13 pcs
• n. 1 power supply 12VDC min. 5A
• n. 1 power switch
• n. 1/2 5VDC Arduino relay module(s) (optional)
• n. 2 2040 rails 500mm
• n. 2 2040 rails 300mm (add 8 more for optional work plane)
• n. 2 2020 rails 300mm
• n. 4 2020 corner locks
• n. 10 LM8UU (LM10UU for 10mm rods)
• n. 4 square Neodimium magnets, if used Arduino Uno
• n. 8 bearings 608ZZ
• n. 2 8/10mm rod 430mm
• n. 2 8/10mm rod 320mm
• n. 2 8/10mm rod 150mm
• n. 2 lead screws 8mm 400mm
• n. 1 lead screw 8mm 120mm
• n. 4 couplers 5/8mm
• n. 3 Hall effect sensors for endstops (optional)
• n. 3 8x3mm round Neodimium magnets, if used Hall sensors
• n. 1 centrifugal blower 50mm
• n. 2 Transmission Chains 10 x 15mm
• screws 3mm, 4mm, 5mm, nuts, brass knurled nuts, as needed
• lithium grease
• silicone or sewing machine oil

Sorry for inconvenience...

har du en materialeliste over det jeg skal bruge for at samle cnc v5 Hilsen tommy

Muchas gracias por compartir! hace tiempo que venia con esta idea en la cabeza. Saludos!

Dear Francesco,
I was following you on thingiverse and I couldn't find any more of your projects.
I am trying to build the Spool winder, diameter sensor and cooler machine. I have the parts but I am missing the electrical diagrams for connection to ramps 1.4.
I hope your help to finish my project.
and I congratulate you for the excellent models you have developed.

I await your reply.
I greet you sincerely
Matias Destefano

I'd advice to carefully read the original project page at https://www.thingiverse.com/thing:2007009.
There you'll find all you need, software and hints...
HTH,
Franco

Dear Francesco,
I was really happy when I found you SHRED-BUDDY3D pelletizer remix. I am now trying to build one by myself but unfortunately I am not a programmer so I have little difficulties of writing and debuggin code for the stepper motor filament feeder in your remix. Would there be a possibility that you could help me a bit and spare your code or send me information where can I found such code for just copy and paste?

Thanks in advance.

Hello ! Links in txt is broken !!!

Hi, I am trying to use the lcd 1602 but i keep recieving this error when I compile the program

LiquidCrystal_I2C lcd(I2C_ADDR, En_pin, Rw_pin, Rs_pin, D4_pin, D5_pin, D6_pin, D7_pin, BACKLIGHT_PIN, POSITIVE);
^~~~~~~~
PORTE
exit status 1
'POSITIVE' was not declared in this scope

If you gets errors when compiling VARSPEED_V7, that may mean you've not copied all ZIP 'libraries' directory content into Arduino IDE's 'libraries' directory...
HTH

Hi! I've bought your Auto-Manual Spool Winder V2, but there is no clutch pinion STL file. I've printed all other clutch files, except that gear, which is missing.

Best regards.

PM me at francescangeli.f@gmail.com

Hi! Thanks for the splendid work! Can you send me the source of Pinion part? I want to use an M3 nut insert i need to modify the actual

Merci pour tout, c'est bon.
Cordialement.

Merci beaucoup. Là je suis sûr que cela va aller.
Je vous tiendrais au courant.