Hi there! we reach to you with a friendly invitation to check some FREE SAMPLES of our work https://cults3d.com/en/users/lacalavera/creations you may find something you love to print, have a nice day friend, let's keep in touch!
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇻🇪 User's country: Venezuela
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
16 comments
I purchased the lamp, and when attempting to print on vase mode, these lines are showing up? Any idea what the issue is?
Link to the photo
https://ibb.co/0BVq7wv
- 0 likes
Hola compré tu modelo. Pero al poner en modo jarrón en cura me salen unas líneas que cruzan el modelo en el interior. Me podrías ayudar ?
- 0 likes
Hola! Mil gracias por comprar mi modelo. Tienes que imprimirlo en vase mode o modo espiral para que solo haga el contorno. Te dejo un tutorial y si tienes dudas por favor escríbeme nuevamente. Que disfrutes la impresión! https://youtu.be/aIm9n1otsok?si=blgZquzBhmHhBstJ
- 0 likes
Hola! Me da mucha curiosidad si pudiste imprimir bien. Cualquier ayuda estoy a tu orden por aquí.
- 0 likes
Hi, how can I get a commercial license for this product? I would be really interested in my store of decorative objects that I will open soon. Thank you!
- 0 likes
Hello! Thank you for your interest. Which product are you interested in?
- 0 likes
I'm interested in the lamp product
- 0 likes
Please send me an email.
- 0 likes
Hello, I've downloaded the paper tube car and I'm in the UK. I tried a couple of different rolls and they all seem to have an inner diameter of 42mm - the rolls fit inside of the holder rather than the outside. I could try scaling them down, but think that will affect the wheel holder part, any suggestions? Thanks!
- 0 likes
Hello! I just added the support for 42 mm tubes in the files. Please download it again to have the latest update and let me know if it works for you. Thank you!
- 1 like
Hola buenas tardes, te escribo por que descargue el diseño y me sale con impresión continua desde la costura hasta el centro, se puede modificar o debo de tener algo en cuenta para que no suceda esto?.
Saludos
- 0 likes
Hola! Gracias por tu descarga! La pantalla debe ser impresa en spiral mode o vase mode para que solo haga el contorno. En las especificaciones de impresión puedes conseguir los detalles. Si tienes alguna duda por favor escríbeme nuevamente. Espero que puedas imprimirla bien y la disfrutes!
- 0 likes
Hi Redlph, my printer is vertex k8400 with Z-axis only 19 cm - 1 cm for heated bed= 18 cm. Can you help me in regards to printing shade? Many thanks in advance
- 0 likes
Hey all. So first I will buy e14 lampholder, and shall print the lamp at (about;need to measure first) 60 percent size. I shall let know the results.
- 0 likes
Hi! Please write me an email and I can help you with two solutions redlph@gmail.com
- 0 likes
How is this supposed to print without supports in an angle of 90º? And the node starts with the watermark and then at 3mm prints the full base without support. I don't understand.
- 0 likes
Hello! Thank you very much for downloading the lamp. I am going to make an update adding images of how each piece should be printed so that you can do it without problems. I hope to clarify your doubts and that you enjoy your printing.
- 0 likes
Please go to the lamp page again and look at the images I posted showing the position to print each piece. If you have any other questions please write me again.
- 0 likes
I'm still trying to purchase your L3 Lamp for $2.60 US but cults is having trouble with their chec-out system. Is there another way I can pay you? If your lamp is in Thingiverse I can send you a tip, or it it's available on another website please let me know. Thanks, I love it!
- 0 likes
Hi, I downloaded your vase. However it was a massive block. Any chance you could upload a hollow vase so I could actually put flowers in?
- 0 likes
Hi, thanks for your download. The model is solid and it was designed to be printed in "spiral vase" or "spiralize contour" mode, make sure you turn off top layers as well or the print will not be hollow. This information appear in the 3D printing settings. It is designed that way so that the file can be scaled to any size and it will always work. I share a very useful link to obtain resistant prints using vase mode. Any questions please write me.
https://www.youtube.com/watch?v=0lEp3-sRIIE&t=351s
- 0 likes
Hello, a question, it is valid for almost all mobiles.
- 0 likes
Hello. Yes, for almost all mobiles. The maximum size is 8 cm (80 mm) wide and 10 mm thick.
- 0 likes
Hello...
Follow me on Cults3d to see my 3d designs !!!
💥💥👉 Everyday I upload new designs and once a week I also upload a free to download design.
👇 You can follow me here...
https://cults3d.com/en/users/Arlon/creations
- 0 likes
My instagram is: @redlph
- 0 likes
Hi! Of course, if you can, I only ask you to mention my instagram in each publication you make with the vase. Luck!
- 0 likes
Hello ! :)
I am writing due to a small question. I wish to know if you agree that I will try to sell your model of vase ( https://cults3d.com/en/3d-model/home/vase-redlph ). I am Mechanical Engineering student and I wish to earn some money to develop my 3D passion. :)
Greetings !
- 0 likes
Buenas compre tu modelo de lampara y al usar el modo jarron o espiralizar contorno la base me sale totalmente plana ( sin el lugar donde deberia encastrar el foco). Tienes alguna idea de porque podria ser?
Hola! Muchas gracias por haber comprado la lámpara. Debe ser impresa en modo jarrón solamente la pantalla. Las patas y el nodo donde va el sócate se imprimen en modo normal sin soportes. Te dejo mi dirección de email para que me escribas si tienes alguna duda: redlph@gmail.com