20 comments

The spraypaint is made to be printet on a resin printer :-)

So I did just make so the lid should be able to be printed on a FDM printer as well

Okay ...
I have been forced (for now) to deactivate all the STL files I have that are not free STL files, as cults have made a very bad decission on how to make the payouts....
I hope they will fix it so I can get my money...

Please do write med at drn.babyz@gmail.com I can send you the file for a FDM printable lid for spraypaint trough the mail

Hi, thank you for the nice words <3
the temperature and bed heat is depending on your filament, there are so many different requierments as there is filament, so you will have to look at your filament spool, the nozzle heat is normally written on a lable.
bed temperature, depends on your printer and again the filament
I have a Flashforge Creator 3 Pro, that is in a closed box, so for me using PLA the bed heat is 50c

I did printe mine on the side, that way you do not need any support

hi there, thank you for asking, Yes you may 🥰
I'm not sure how good it is to print in that scale, but I think you will find out, if you didn't already 🏵🏵

Thank you very much, i will let you know how the print comes out in that scale so you can let people know

You are very welcome! And I will waith to see if it is possible

They came out very nice in 1/24 scale, thank you

thank you for letting me know 💕

You should only pay once, and then get acces to all the files

as from what I googled, you vere having to pay for all parts by it self? I have never had that problem before.
It should give you all parts for one price

But give me you email, and I will send it to you

Ahh that file :-)
the wall is a Piece of MDF wood, that I painted, so not a print file

can you make a similar wall with window and door? i want to start making dioramas but I'm not good at creating walls. i can pay

I can see what I can do, but it is 1,2 cm thick, so it will be a long print time wise, but I will try to make a small diorama for you <3

Do you have a email

my email is kubr0910@gmail.com

super

I did send you a mail

What wall file? sorry I need to know what print file you are talking about

Thank you so much for your coment, I'm happy to hear that you like my work, and especially this one,I used a lot of time, and thoughts for this :-)

The drawers should be able to be printet with one or two rooms in them, or is it the timy end drawers you were thinking of?

I will hurry up and make your wisches my comand, and actually I allready did the big drawer with 6 rooms for you, I hope this is what you had in mind <3

Thank you, I need to go look at my files again. The bead drawers which I love especially with the two rooms on them would be great if I could print more and they would fit inside a box with slots for the drawers. I have more colours of beads than drawers with compartments inside the loom. It would be great to have a permanent storage of those little drawers in a holder, then I could swap in and out.

That is actually a great idea!! So I just made two different storage units for the drawers, one with room for 4 drawers, and one with room for 8 drawers :-)

Brilliant thank you

You are wo very welcome

Jeg har faktisk et ønske :-)
Jeg har en lille 1:12 dukkedame, som ikke har noget hovede, og jeg vil rigtig gerne have et hovedet til hende, men jeg kan ikke selv lave det, måske det var noget for dig, kan jo se du laver de fineste hoveder?

Jeg er glad for din henvendelse - og tak for rosen af ​​mit arbejde. :-) Jeg skulle nu bruge lidt information: Hvordan skal dukkehovedet se ud - som et normalt dukkehoved eller realistisk-menneske? Skal det være feminint, maskulint eller neutralt? Skal jeg forme hår på det, eller skal kunstigt hår limes på senere? Skal den have en hals med skulderfastgørelse, eller skal den skæres af i nakken som actionfigurhoveder og have en halsudskæring på indersiden? Har du bare brug for 3D-modellen, eller vil du have mig til at printe den og male den i chiaroscuro-stilen (jeg har eksempler på dette på min hjemmeside https://www.3dmanufacture.art/da/kopie-von-sculpting-designing)?

Har du en mail adresse, så kan jeg svarerdig lidt hurtigere på dine spørgsmål om hovedet, og sendedig et billede af den hals mekanisme dukke pigen har!

Men jeg tænker d et gerne må være feminint og jeg vil egentilg gerne selv give hende hår på hovedet, men tror det er mere praktisk hun har hår på til at starte med (jeg bruger hende til at afprøve mit miniature strik) så tænker det er bedst med formet hår.
jeg kan se du også er mega god til at male, men det skal jo helst passe til hendes krop, så tænker det nok er bedst jeg selv maler, så en printfil er nok fin.
Du kan jo sagtens smidde den færdige STL op her inde :-)
Jeg har købt selve dukken på Ebay, og den var uden hovede, jeg har ledt vidt og bredt efter et hovede til hende, men finder kun mandelige hoveder der ude i verden, og den går altså ikke til hende her LOL

Hej Daniela! Undskyld venligst den lange responstid. Jeg modtog en stor bestilling af skulptur og trykning med kort varsel og skulle arbejde på det først. :-)

Du kan sende mig oplysningerne om hovedet til hej@3dmanufacture.art, så får jeg et overblik over hvad der skal laves og kan lave et tilbud til dig. Jeg uploader ikke bestilte skulpturer til en platform til generel download - jeg opretter dem udelukkende til kunden. :-)

Jeg har sendt dig en mail, ingen grund til at beklage sådan er livet en gang imellem

Hej Richad
schön dich zu treffen!
Dit danske er super fint :-)
Jeg er rent faktisk født i Kiel, Tyskland, min mor er Tysker, men jeg er opvokset i danmark (jeg blev bordtadopteret som lille) fand dog min mor gennem sporløs i 2000 :-)

Jeg laver faktisk ikke ting til nissedører, med det kan de også sagtens bruges til, men jeg laver det i 1:12 som er den mest kendte størrelse for Miniature huse (dukkehuse) der er rigtig mange voksne kvinder der laver den slags miniature :-)

Og ja skøndt at se en anden "Dansker" her inde LOL

Ich habe in deinen datei geguckt, und Du has sehr schöne 3D STL's dardrin
Liebe grüsse Daniela

I see I wasn't fast enough to get to help you <3
I'm happy that you did figure it out on your own <3 thank you for the nice words about my creations, I'm really happy you like it <3 please do write me, if I can help you with something els

Hi there, thank you for asking first. as long as you paint before selling and you do not sell in Denmark. you are welcome to do so. Happy printing and painting

Thank you so much! Sorry for such a late reply - had some family issues. Hope you are well and thank you!

Don't worry, it is all fine <3 Thank you I'm doing okay, I hope you and your family are doing well to

Sorry that I did not answer before now, I just had a accident a week ago, and I'm a bit handicaped right now, It would have been a bit easier if you told me the name of the printfile.
You need to bring the file into your slicer program, and then put the supports on there b efore you slice the file, it is a question of what slicer you use

Hej. jag har flashforge adventure 3. Kan inte alls hitta hur jag lägger till supports. programmet är flashprint. Det är ljusstaken jag vill skriva ut.

you can find it on the right side of the flashprint, it is the button that says "support" when you hower over it.
sorry I took so long time to get in toutch..
I had a accident 14 days ago, making everything a bit harder to do.
Anyway I hope you did figure it out

Uhh wich one? and yes you may

The lion face one

Ahh you are right there is something wrong, sorry about that, I will uploade it over, please do downloade both parts and print the new parts

Please do go watch the video I linked in the description for the hotglue gun, you will learn everything you need there!
and just to help out the link is right here for you: https://www.youtube.com/watch?v=ywOU0tTIgTE​

Hello there sorry I were a little long to answer you 💕
As long you only sell things in the scale of 1:9 you have my permission 😊 but please do let people know that the design is from "DRNbabyz"

Thank you so very much for asking first 💕
And now I feel like creating things like fence's and bucket and other hors useable things LOL maybe something like that will come up in a few days, especially for you (well I will be making it in 1:12 as normal)

Sorry I totally forgot this :-)

Hi there I made these bottles for the resin printer, so without the hole in the bottom, the resin will get stuck in the bottle, what is not good at all, there for the hole.
I just went to my designe, and remouved the mittle hole, and will uploade the bottles in the same library as this one

Find me on my facebook, then we can see what I can do, but I actually got my lables from google, just googeling paint lables, and then printing them out so the fits https://www.facebook.com/profile.php?id=100008839090366

Hola, I hope it is okay that I write you in English, as my Spanish still isn't that good.
What file did you buy? and yes I can send you the file, I just need a email from you