/https://fbi.cults3d.com/uploads/user/avatar/14623113/20046358_10154701046081551_1404481496436581788_n.jpg "coppertop001")
do you have the un sliced file
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇺🇸 User's country: United States
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
16 comments
Hi, I’m just getting ready to 3D print an RC jet. Is there a list somewhere of the parts I’ll need (motor, servos, drive shaft, and what size propeller)?
- 0 likes
the propeller is in the print files, sorry I don't know much about the motor or other parts because I haven't finished mine and the design was a bit of a kitbash between two different 3D print files (the boat had a standard propeller and another print file for a jet boat motor).
If you look at remixes there is a guy from Russia that actually finished a build and put a remix up and his files might have more information.
- 0 likes
Hi had to send you an offer because it would not let me just download the item. My cousin is redoing a cooey and needs this part. Thanks! :)
- 0 likes
no problem, I responded to the offer
- 0 likes
I purchased the design for .30-06 not realizing it was so large. Do you happen to have one that is 2 pieces?
- 0 likes
sorry I didn't see this message, not sure why I didn't get an email in regards to this, do you still need it in two pieces?
- 0 likes
Do you know if the Cooey model 600 trigger. It looks like it would fit a Marlin 81 .22. Id like to replace the one I have with a newer looking one i printed if so!
- 0 likes
sorry I do not know if it would clear the trigger, I don't have a Marlin 81 to test from.
- 0 likes
привет! можете выложить отдельно фото катера ремикс в собранном виде
- 0 likes
Hello do you have any information on your boat print about the hardware needed
- 0 likes
I haven't finished mine yet, I do know that another member did and has done some remixes, might be able to track him down and see if he's got a list.
- 0 likes
hello, i bought an ammo case for 300 win, i would like the file with the cover separate from the case.
- 0 likes
No problem, sorry I didn't see the first message.... I need to ask though, do you realize that there is a pin on the bottom piece that goes through the hinge on the lid.
Can you send me your email and I'll forward the two pieces to you.
- 1 like
Yes, I noticed, my problem is to print the assembled project, my printing table is small.
That's why I'd like the separate parts.
follow my email: fernandinhohfs@gmail.com
thank you so much
- 0 likes
hello, i bought an ammo case for 300 win, i would like the file with the cover separate from the case.
- 0 likes
hello did you have a page or a video for the assembly of the boat with more detail on the design
- 0 likes
Interested in getting a model 600 Cooey trigger guard. Can somebody with equipment give me a price?
- 0 likes
Will you design a 50 round case for 338 lapua magnum?
- 0 likes
Sorry for the delay, I don't check my messages very often......as for your request I'll be designing some 45ACP/Auto, 9mm, 40, 38/357 ammo cases shortly and I'll grab the dimensions for 338 lapua mag from my reloading book and do up a design.
- 0 likes
Hello. I purchased the 223/5.56 100 Round Case design. How do you keep the two parts of the model from printing together right before the layers of the hinges are printed? I am using Cura as a slicer.
- 0 likes
I don't understand, I've used repetier and S3D slicers on these designs, I print exactly how they are laid out with no supports, the hinge when printed will be tight but if you use a pair of large pliers or something to hold the middle part of the hinge and lightly twist the hinge back and forth it'll loosen up and close.
- 0 likes
yeah when I imported the STL of the original design for remaking there was serious issues that I had to repair........my slicer (was using Repitier) was able to repair and print the sections without issues.
- 0 likes
Which design were did you import, if its the uriel's gift yes there is some issues, it came when I tried to import the STL from the original Thingiverse stock, usually my slicer can fix the manifold issues.......unfortunately if you see the imported STL in Sketchup you'll know why chasing the manifold issue is a pain in the ass.
- 0 likes
The Uriel's Gift stock mid barrel file seems to have some nonmanifold issues. Since I haven't printed anything yet, I'm not really sure what kind of fix is needed. Any insight would be greatly appreciated.
- 0 likes
see the comment above, try your slicers repair manifold option, it should be able to fix it automatically
- 0 likes
hello for the jet boat what size shaft did you use cause i have a 10mm one does it need to be bigger/smaller