Hi can you send me the instructions for the other wallet called the CARD AND CASH HOLDER
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇹🇭 User's country: Thailand
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
28 comments
Hello can you please show me the instructions for the wallet
- 0 likes
Hello can you please show me the instructions for the wallet
- 0 likes
Hello can you please show me the instructions for the wallet
- 0 likes
Hi, your model for car phone holder is amazing. but my dad's iPhone 6s and my Samsung S21 Fe it is too small, so Ive made a little upgrade - wider part, so it can fit smaller phones, now it is enough to fit iPhone 6S with case and bigger phones. Here is the link for the part, would be nice to add it to your files as update, i guess :) https://drive.google.com/file/d/1aToDuQMqY9gHrJPMsQnx-Zz31QlIpYkM/view?usp=sharing
- 0 likes
CARD CASH HOLDER V.3
Hey friend. Any pointers on how to free up the mechanism? i printed this file 6 with the specs you posted with the same results, the mechanisms all are stuck together. some gentle tapping and box cutter on it until eventually they break one by one. What am i doing wrong?
ender 3
tried both pla and petg
- 0 likes
printed 4 more. beautiful print. just cant free the mechanism on any of them. please advise, thanks
- 0 likes
hey- i set the expansion to -.08 in cura and the mechanism print and broke free almost perfect. do i have your permission to print and sell printed copies to friends? (not the stl}
thanks again
- 0 likes
my print is Elegoo neptune 3 pro ,
You may need to adjust the settings to be compatible with your machine,
You can sell your printed products.(not the File stl}
- 0 likes
Hello, I have a question about the Car Phone Holder NO:01. I have troubles printing the carholder front part. What printing orientation did you use and what settings for the support. The small pins to steer the crank parts always break when I try to remove the support (with the buttons down orientation). And second question: how does the parts glide so smoothly, do you use some kind of lubricant?
- 0 likes
answer 1. this part " car holder front part" print with support . You can see this picture on this link ( https://drive.google.com/file/d/1-KDmYWeEQ6uVa258Sikz0yxyn6vyBm69/view?usp=sharing )
- 0 likes
The small pins to steer the crank parts always break (maybe adjust infill more than 20%)
- 0 likes
answer 2. No need to lubricate ,if you use program cura ,Actives "Z seam relative" ,every parts that will be better
- 1 like
Thank you. And what settings do you use for your support. (Density ?, Z-distance ?)
- 0 likes
You welcome, My setting support (support Density 15%,support Z distance 0.24)
- 0 likes
Hi, I'm interested in model #867630 of the hop grenade. Do you have other formats such as SLDPRT or STEP files. I want to import into a CAD/CAM system and cut one from metal. I already download the STL file but my CAD/CAM system doesn't read that format.
- 0 likes
I can give you and a message This is like a contract.
For SLDPRT or STEP files there is an additional cost of 100 EUR.
You can bring files to resell. or can be used commercially
2.You can publish as needed
If you accept the terms and conditions, you can contact.
- 0 likes
thank you very much, will you also release some with logo and pictures ? like Punisher or Molon abe ?
- 0 likes
i can try also to add a svg on the money plate
- 0 likes
Hello i buyed your wallet and printed it out for 6 cards. the locks are way to tight i could get it managed with much force after i scale it 2% up, but i wanted to ask if you could send me the step file for the locks to change it bigger or maybe you have time to make them a bit bigger for easier snatch. thank you nice design
- 0 likes
hey could i get the cad files to the gavity utility knife i want to have a machine shop make me one out of aluminum but they would need the cad files. I really like the plastic one but it doesnt hold up well enough for every day use on the job site.
- 0 likes
I can give you and a message This is like a contract.
For Solidwork files there is an additional cost of 399 EUR.
- You can bring files to resell. or can be used commercially
2.You can publish as needed
If you accept the terms and conditions, you can contact.
- 0 likes
ratchet part need support and the design is not reasonable
- 0 likes
if you reaad my all my 3d setting you woll see "Just two Part Need Support
1.CarHolder Front Part
2.CarHolder Bottom Part"
- 0 likes
hi I bought this project of yours it is very practical, but I wanted to ask you is it possible to increase the size of the rear purse?
- 0 likes
Yes it possible to increase the size of the rear purse ,what size do you want?
- 0 likes
hi but does 0.75 cents refer to the complete portfolio project? If I buy the file is it a stl?
- 0 likes
answer : this project "CARD AND CASH HOLDER " it complete set and STL file
- 1 like
ciao ma 0.75 centesimi si riferisce al progetto del portafoglio completo? Se io compro il file è un stl?
- 0 likes
Hello, I've printed out a couple of your wallet designs and a lot of friends made the comment I should sell them and I will not unless I can receive permission from the file creator or possibly buy said rights to file whatever your decision is, it will be respected and no sales of your creations will be made without rightful permission. thanks and hope to hear from you soon!
- 0 likes
I permission :)
- 0 likes
Hello. i'm wondering where you got the screws from? I cant find any set that includes all of them.
- 0 likes
You can find it at any hardware store or find it at the link https://www.amazon.com/s?k=Head+Cap+Machine+Screw+m3&crid=BOW2E7J5C4X2&sprefix=head+cap+machine+screw+m% 2Caps%2C341&ref=nb_sb_noss_2
- 0 likes
Hi we have a placement offer for you to take over digital arts section on our online marketplace. not spam. even know i said not spam it still looks liike spam. not spam
Cheers
Carl
- 0 likes
Thank you for your interest in my work on this website. I'm just doing hobby work.
- 0 likes
But if you offer me how is it work And do you have a sample work or website for me to look at?
- 0 likes
Hello, I am interested in using the enw mechanical stand in donection with a car went holder to use a went holder with the mechanical arm is there any way to do that ??
- 0 likes
hey do you have a video for the phone holder i cant figure out every part i need
- 0 likes
i will send video for you soon .
- 0 likes
I bought, and am currently printing, your phone holder for the car and I just noticed the phone stand. Are the parts the same for both but with a different attachment for the back?
- 0 likes
Hello, The arm connector and the back piece are different. If you want the phone stand, you can check this link out.https://cults3d.com/en/3d-model/gadget/phone-holder-no-01
- 0 likes
/https://fbi.cults3d.com/uploads/user/avatar/13959472/NeoXolotl.png "NeoXolotl")
Hello, I am interested in buying some of your products, I plan to sell them 3D printed. Is there any extra cost for the sales permit?
- 1 like
You can sell finish prints models at no additional cost. But don't sell and copy my stl file .
- 1 like
perfect, thank you very much
- 1 like
a very nice design, would it be possible to modify the design to have only two cards?
- 0 likes
Maybe I can. Let me check first.
- 0 likes
ok thanks
- 1 like
thank you very much
- 1 like
Hi thanks for the design ☺️ can I sell a couple of this wallets at work ?co workers
- 1 like
Sure . why not :)
- 0 likes
i didnt realize i could not use this is bambu. not asking for the $ back, just for guidance. do you know any work around for that? seems i can use gcode but not the way this downloaded. uuggghhh...thanks for any guidance.
"I have already updated the file for Bambu Lab. It’s ready and available for you to download now."