👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇦🇷 User's country: Argentina
🌐 Member’s preferred language: Spanish. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Hi I love your works !!!
I would like to ask you if you made all the minis of the game ?
In fact I would buy the 2 other teams in green and yellow but it wan't possible
You think it's possible to have them ?
Thanks for your answer and your job !!!
yeah its posible
Hi! Any possibility of add a ring to attach a carabiner to te Retroid Pocket 5 case?
Yeah. Good idea
Thanks, sir!
done. Search the last 2 images have an hole to attach a carabiner
Any recommendations on what to use in th hinges and clasps for the retroid 5 box?
i use PLA for all.
For better strength, it is advisable to print the latch on its side to make it more resistant.
Once printed, when you add the foam, you only need to add base foam because the one that comes as the base is too tall
I mean, what do you recommend for holding the hinges together? Is there a pin size or screw or something it's sized for?
I used a screw that is 3mm in diameter and 30mm long
Is there any chance that you will model the referee from Trick Shot?
hello, do you know what size i shoud do this in to match the playmat size? also, how much pla does it use?
I suppose you are talking about the stadium for Trick Shot, each part weighs 76g (near 700g total ).
You can print it in the scale it comes with.
STANDEE HIT / LIFE COUNTER for gloomhaven is bigger than game's hexs. Can you fix the scale?
is slighty bigger because 25mm miniature bases. I can reduce the size for cartoon enemies if you want it.
Couple notes for future revisions;
The benches are shorter than what's printed, in the game you are supposed to fit all 3 of your re-roll tokens along the bench, the printed model only fits 2. I think aesthetically this is better but somebody might prefer having the full printed bench length.
Also, these would really benefit from having some kind of recessed holds in the sides to allow magnets to be glued in so that these could be assembled and taken apart easily. I unfortunately didn't think about this until I was basically done with everything.
Bigger benches done. redownload if you want it
Hi I tried printing some parts from the trick shot seating and they all seem to be coming into my slicing software very small. For example the "Stairs-1" comes in at 56mm wide. Is that the intended size?
Sorry I meant "seats-1" not stairs
the scale is needed to be fixed because board game receltly released. do you have the game now? if you give me this size i fixed it and reupload. https://boardgamegeek.com/image/7181035/zedoniusarg i need the size of marked lines in this image
the width and lenght of the playfield from red line to the other side red line
80cm x 37cm
This is a first edition board but I don't think they have plans to change it for the upcoming second edition
if the size of the playfield is same size no problem
I fixed it to this size. Look it now.
Thanks for the fast adjustment. I tried importing seats-1 into my slicer and now it's even smaller, measuring 11.7mm wide
Weird. What is the size of the Stair 1 model in your slicer?
old version: 10 x 42.1 x 20 mm, new version: 2.1 x 8.8 x 4.2 mm
I found the problem im fixing it again
done try it now
I recommend to print curve first to test the scale. Is the better choice.
Printed the jackbots without adjustment and they came out about 8mm across on the base. Is that right?! Seems tiny! Tentacles came out at like 20mm, which seems about right.
I updated it a few days ago to correct print size. The size of the jackbot wheel should be the size of the Fiddle Wheel Mini, and the size of the Gorgoneions should be similar size of the Gorgoneions in the gaia model mini (a bit bigger because to tiny)
but you can print bigger if you like it. I prefer to keep it similar to the dimensions of the master
/https://fbi.cults3d.com/uploads/user/avatar/18659070/Zedonius_Firma.jpg "Zedonius")
Hello apparently they have changed the foam sizing as it does not fit mine. Might there be a way to get a resize? I can send measurements.
yep sent me new measurements
the bottom section has increased to 33m in height the rest is the same and the top piece is 7mm so the only change is the height I can try to send pictures if that can help?
I understand what you’re saying, the size remains the same, but since the foam base is very tall it’s better to use any regular 5 mm foam instead of that base, so the box ends up smaller and more portable. I used a 5 mm one; the original foam base measures 16 and all that height doesn’t add anything.
In my box there are 3 foam pieces: the bottom one is 16 mm, the middle one is 15 mm, and the top one is 8 mm.I replaced the 16 mm one with a 5 mm.
My middle and bottom measure 17mm and the top is 7mm for me
hpw may mm less height needs now?
or more height sry
With the two bottom pieces in the current bottom printed case it sticks out about 11.5mm
Done download +11mm version
I would have preferred to replace the bottom foam with a thinner one so the case would be smaller. But I uploaded the new model there for you.
I printed it and the ridges that is for one of the screws printed completely seperately as well as several others