/https://fbi.cults3d.com/uploads/user/avatar/18717931/hrddesignworks.png "YosHRDworld")
🇯🇵in🇩🇪 /Engineer, Maker, Hobbyist, Car/Motorcycle lover
Designs for 3d printing from my private projects
日本語でのお問い合わせもお気軽にどうぞ
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇩🇪 User's country: Germany
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
so i tried using it with the hybrid racing short shifter and it hits the left and right side, its so close that like 5 mm on each side would fix it
Thanks for the information! I’ll check if I can widen up 5mm on each side. Is the front and back space ok as it is?
yes those are just fine!
Hi, I just made 5 variations, which is +1mm to +5mm wider on each side. +5mm on each side may slightly weaken one of snap hook as it reduce the thickness partly. Hope you find a perfect fit for you!
Hi, I was looking around to see if anyone made the lower grill 3d file, like the whole grill? Is this something you would be able to make I’d happily buy it. I did buy this thinking it was the whole grill but later found out it was just to shut it off, but I would have to be able to print the whole grill.
Hi, sorry I cannot make the design of whole grill as I dont have the car/parts anymore. Is the title and/or the description misleading that is contains the whole grill?
Hi I purchased this download and the design looks like it will work great,
but it appears to be missing the Item #6 "Adjust nut wheel M5" from the "Angle gauge holder type 2 "
Thank you
Hi, thank you very much for your purchase. "Adjust wheel nut M5" is a part of "Wheel rim attachment" (https://cults3d.com/en/3d-model/gadget/wheel-rim-attachment-for-diy-wheel-alignment-gauge) which I think you have downloaded already. hope this helps and you can enjoy it!
Hi! I love your design and wanted to buy it. But I tried to find a square tube 20x20mm in North America but here are only 1x1 or 3/4x3/4 inches (25.4x25.4mm or 19.05x19.05mm). Can you readjust inner square joints if I'll buy it?
Hi, I'm sorry fro my late response...and sorry to say I would like to avoid adjusting all of parts as it's going to be quite a bit of work and after that I will have double amount of files to maintain. So far many people from the US downloaded it... so I hope you can find 20x20 square tubes somewhere...otherwise, I think an option could be using 19.05mm one with some kind of spacer (whether 3d print shim or aluminum tape or so) but I have never tested it before.
Hello, I'm also a Civic 10 owner (2017). I want to design something for the space in front of the gearshift and below the climate control, but it's a difficult area to measure. Could you create a design that fits perfectly there? I'll modify the interior to my liking, but I need a design that at least takes the interior space and frame into account. I'm sure many other owners need something similar.
Hi, thanks for your message. Actually that’s one of design that I‘m currently working on. It’s still work in progress but you might like it. If you want to know more about it, please contact me via instagram or facebook in my profile.
Hey i would like to know if there's any way we could print and sell your products with a Patreon or maybe we can set up another agreement with you if you are interested let me know.
thank you for your message. I reply to you on instagram.
Hi there! Just got the model and I wondering what do you mean by bottom face down in the printing settings. The part that goes below the door on the print plate?
Thanks for your message. Yes, you are right. the bottom of the part goes below the side skirt is designed flat to stick well on the printing bed. please also refer the picture in the model page that I show how I placed it in slicer.
Really cool SV650 files, if you ever decided to make something like this that mounts to the sv650 i'd pick it up! https://cults3d.com/en/3d-model/various/cafe-racer-front-fairing-2-0
Hello, I've already measured with your system several times. Unfortunately, it's the case that in many cars, the rear axle cannot be adjusted. Therefore, despite all efforts, the steering wheel is always a bit crooked. Do you have any idea how to make it possible to adjust the front axle correctly even if the rear axle is misaligned, so that the steering wheel also points straight?
Thanks for your message. I’m not a professional so please take this as just an opinion of alignment DIYer.
Well, if the car runs fine and just want
to make the steering wheel straight, then you can adjust the same amount on the both tie rod (one side make it longer and another one shorter).
If you want to correct the alignment of a fixed axle rear suspension, I think there are several approaches but it depends on the suspension type ( torsion beam? Rigid axle?…) and/or where the misalignment coming from (damaged rubber bushings? Deformed torsion beam?…) .
Hey! From Australia, just wondering where you got your headlight bucket? I'm trying to get an aftermarket headlight LED and can't find one that fits the oem bucket as i've torn the front of my bike off!
Hi I uploaded the file of the headlight housing. Please find it from my profile…!
The 3D printing files I needed arrived quickly.
Thank you very much for these
Hi
I ordered the 3d printed parts, looks good.
For some reason these files were not included.
- wheel trim attachments
Hi, thanks for downloading my design. For Wheel attachment, Please download here https://cults3d.com/en/3d-model/gadget/wheel-rim-attachment-for-diy-wheel-alignment-gauge
Good day, I printed this model https://cults3d.com/:786662 of a vehicle height measuring tool, however, the middle ring won't turn despite silicone oil and a lot of force, and I don't know why.
hi, t may occur by over-extruding or any other reason but as an alternative option. I just made a middle circle for separate printing and assembling it. Although it requires Back up ring and 3x M3 screws additionally, it may be an easy solution.
in that case, please delete the middle circle from the base plate in your slicer. hope it helps....!
Servus guten Tag, ich weiß nicht ob du deutsch kannst aber ich Versuch trotzdem mal zu schreiben und zwar deine Datei die du erstellt hast hier für das Lenkrad zum fixieren. Ich hab mir die jetzt mal heruntergeladen aber es fehlen paar Dateien weil auf dem Bild sind ja viel mehr Dateien auf als man downloaden kann oder muss ich dieses komplette Set für 20 € kaufen?
Lg
Hi, danke für deine coolen Designs zur SV650 :)
Ich habe eine Frage zu der seitlichen Kühlerverkleidung.
Bestehet die Möglichkeit, die Wände etwas stärker als die 2,4mm zu gestalten?
Dann könnte man nämlich auch einfcher und schöner zu druckendes Material wie GreenTec Pro verwenden, was zum Beispiel sehr hitzebeständig ist, aber halt erst ab Materialstärle 4mm.
Ich selber bin leider nicht os bewandert, daher die Frage, wie aufwendig sowas für dich wäre, das Teil generell etwas "dicker" zu machen.
DLzG, Tobi
Hi, thank you for the message but I think I'm not the right contact. Please respect the work that the original designer had put on it. If you want to negotiate for the price, I'd recommend using the "make offer" function in the original listing.
Hey, I think you should design the BMW f22 “Diamond Design Splitter”. They are getting really popular at the moment and I cannot find anyone that has published a 3D print download for them. Here is link: https://www.reddit.com/r/BMW/comments/189mndd/anyone_know_where_i_can_purchase_these/
Hi, thank you for the contact. I think they look great but I would not make a copy design for 3d printing. As far as I can recall, they are selling it in a fair price and shipping worldwide, aren't they?
hi i was wondering on your wheel alignment set up is it possible modify it to use 15mm x 15mm aluminum excretion I'm asking because i have a bunch i would like to use
Hi, thank you for the contact. I'm sorry to say, to modify all designs is a bit too much work for me at the moment. Some kind of spacer (something like U-shaped to fill the gap between 20mm and 15mm) may work for some cases but I'm not sure...
Suzuki SV650 3rd generation (2016-) Front side fairing can this be used or modified to fit an on an 05 bandit
Hi thanks for your message but I have no knowledge about 05 Bandit and I don’t think it fits…
Grüße,
Ich kann die stl Datei nicht runterladen.
MfG.
Hi, which design you are trying to download?
Hello, I need a BMW F SERIES REAR VIEW CAMERA ADAPTER BRACKET for bmw ICAM2 R camera, would you be able to make that? And how much would it cost. Appreciate in advance
Hi sorry I haven’t noticed this message but I assume you contacted me via instagram in the meantime.
Hallo
Ich habe die Grundplatte 112 gedruckt, habe aber das problem das ich den mittel Kreis nicht drehen kann.
könntes du mir villeicht sagen wieso das nicht geht oder ob ich was falsch gemacht habe
Hi sorry I haven’t noticed this message and hope you figure out in the meantime. there might be several things to consider in printer settings such as over-extrusion. On the other hand, some silicon spray may help to free up if the parts are lightly sticking.
Hi,
Ich wollte fragen welche lochkreisdurchmesser deine Multi Version des Werkzeugs zur Fahrzeughöhen Messung hat. Sind dort alle lochkreise vertreten oder nur bestimmte?
VG
Hi sorry I haven’t noticed this message. The multi version is for pcd 100/112/114.3/120.
Привет , можешь создать модель подкрылкиа Hugger на suzuki sv 650 gen 3.
Hi sorry I haven’t noticed this message. And I don’t have a plan to make a hugger or fender at the moment. I assume it’s going to be a little too large to print by a normal home use 3d printer…
Hello,
I would like to buy commercial license for your products. Would it be possible? Thank you
Hi, thanks for your message.
Are you interested in something particular? Do you have any plans how you want to sell? Would like to hear your ideas. Could you contact me via email?
Email: yoshrdworld(at gmail.com)
/https://fbi.cults3d.com/uploads/user/avatar/16275404/IMG_7747.png "RayneVR")
/https://fbi.cults3d.com/uploads/user/avatar/50488945/IMG_8602.png "borikenmanufacturing")
/https://fbi.cults3d.com/uploads/user/avatar/38397412/magicstudio-art.jpg "tomdavies98")
/https://fbi.cults3d.com/uploads/user/avatar/33800452/new.logo5.png "CarCutureCyprus1"){kind=logo}
hello can u add a size for a kuned buleet short shifter please
the top needs to be open bigger as it hits and shifts the plate
bottom
maybe a little aswell