/https://fbi.cults3d.com/uploads/user/avatar/17482481/Captura_de_pantalla_2022-11-08_193911.png "PomeraniArt")
Hi I have printed a couple of these for work and noticed that the double version has 11 holes
is it possible that a 12 hole version could be made ?
many thanks
- 0 likes
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇪🇸 User's country: Spain
🌐 Member’s preferred language: Spanish. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Write your message:
hey! what setting do you print this on? I can print the test file no problem, but as soon i print the 6x6 it just spaghettis...not sue what i'm doing wrong
Hello! I am sorry for taking so long to reply, i think It looks like your bed is not levelled, have you tried to level It? I even pushed my standard 0.4 nozzle to print at 0.6 wall and printed perfectly, are you experiencing that from the first layer?
no worries! we are all super busy with life! I was trying to print this with a mingda magician 2, which has an auto leveling system, i am new to 3d printing in general so it is very likely just a user error. It had no problem making the initial outline skirt for the print but as soon as we started moving to the peg circles it the entire print would just wrap around my nozzle.
Going to be trying it on a bambu x1c today hopefully
Try printing something with the same área and check whether you have the same issue or not, there are a lot of things to consider like good leveling, enough bed and nozzle temp.. prusaSlicer has a really good calibration tool, you can use it to figure out temps and fine tune your printer and filament. Good luck with your printing!!