3D models for cosplay and all sorts coming up!
I am up for requests so hit me up if you have something in mind!
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇫🇮 User's country: Finland
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
Hi, I have two questions regarding your Love and Deepspace|Hunter Firearm file. Would it fit on my BambuLab A1 mini or would it need to be scaled? Also, do you remember approximately how much filament it takes for one print? Thanks in advance
It does fit if I just slice the base file in two! It'll probably takes like 200-300g
I've added the sliced parts so you'd be able print it easily with your A1 mini without any scaling
Have You ever consideed makeing a 3d template that would fit a few tablets. like one gets 2 samsung 11 inch tablets one on each side
Hello, I love your cosplay props, I wanted to see if it would ok with you if I were to sell the finished product, of course crediting you as the 3D artist and linking your cults3d to it.
Hi,
I have a problem with Lord of the Rings | Hadhafang.
The decorations on the blade in the Hadhafang_3 file seem to stick out, while all other files have recessed decorations.
Is it possible to get the file with recessed decorations?
Furthermore, the parts are too high for an average 256 mm printer.
Thank you
Hi! I've updated the files now. The markings are also now inward instead of outward as they should be. Seems like I just haven't updated the files. I also added more sliced ones so every part is now split from the middle further.
Thank you very much for the quick response.
Hey there,
I saw that you wrote that Jills Rapier (https://cults3d.com/en/3d-model/fashion/final-fantasy-xvi-jill-warrick-s-rapier) also comes in a 1,10m length, wich would be perfect for my GF. Now i have a few questions? Are the Rods still the same that are needed for the 1.10 version? (Obv they need to be shorter, but the ⌀ stays the same i think? Also, does the 1.10 version also comes pre cut?
I´m also intrested in Clives sword (https://cults3d.com/en/3d-model/game/final-fantasy-xvi-clive-rosfield-s-sword-adult-version), but 1,50m is a bit to long for my taste, I would prefer 1.40... but when i resize it, i guess the ⌀ of the rods will shrink with it? Or does the slizer keep the hollow parts for the rods? I´m new to 3d printing and just grasping at straws.
Lastly, are the measurments of the rods precise? I bought another file that said i should use a 10mm rod, but since the creator worked in inches it was just roughly calculated an everything was wobbly. I already saw that you work mostly in metric, just wanted to ask you directly after my first experience.
Thanks for your time
So, i saw that you mentionend to just shorten the blade for Jills Rapier, but if i wanna slice it, Blade2 gets a manifold edges problem (its the one between Handle an the rest of the blade)
when i wanted to print the other files in the meantime, i saw that there are more Files that casue problems:
Blade 1, Blade 2, Blade 6 ,Decoration 1, 3, 4 and 5. Is there a way to fix it?
If I let my printer repair it, the places for the rods get filled up.
I uploaded 110cm Jill version, I just haven't seem to upload it :D I seem to have 110cm version of Clive sword too, but that might be too small though. The rod itself doesn't need to be exact size as long as it obviously smaller than. it can be made thicker with aluminum tape etc. Making it 10cm smaller doesn't really change the size that much. It should still fit 12mm rode. I remember adding quite bit of wiggle gap just in case.
Calculated it that the shrinkage is almost 1mm so it might be really tight.
Hey, i worked woth the Jill file, and printed the blade, the Rod and 110cma work perfectly fine!
But, and here is a problem i cant fix myself: Decoration 1 seems to miss 2 holes for the Pins so that Decoration 2 can connect to it
Good evening! I’m trying to start a small 3d printing business where I model and sell prints, but I have a customer very interested in your model. It’s the rifle from final fantasy. I was just wondering if it’s possible I could sell your model? Thank you.
Could you add the emblem on the front of Lighter's jacket (the one right above his patches on his left side that is partially hidden by the flap?
thanks.
It is included, I just havent taken images of all of the small parts that I added later. I should add them too for transparency!
Ride forever from the back is there as well even if it might not be most convenient way to make the logo in the back
It is? I picked up LIghter's accessory pack and not seeing that (nor the Ride Forever, but used my Cricut for that). It is in a different pack?
Huh, I was sure I added them but seems like I havent! I'll try to remember to add them once im on my PC!
Hello, I hope I'm not disturbing you. Your work is truly impressive. I'd like to ask under what circumstances I could sell physical copies.
Hello, I was wondering if you could make an armor and weapon set for the NEDF Soldier/Rebel Jaegers from ZZZ?
Hmm, never thought about that, I might will!
Well, if you ever consider it, I'm more than happy to share a MEGA link with you that has models and reference images.
I might have those models you're talking about already somewhere (I rarely use them, more as an reference) and references are easy to get, thanks though!
I'm going to take a wild guess and say that the models you got are from SFMLab? Cause that's where I got them.
Ahhh no :D
hello! I need more information about it : https://cults3d.com/en/3d-model/fashion/clair-obscur-expedition-33-sciel-s-scythe
i want to buy it but i need to know at 15% infill how much time and how much mt filament need it!
Don't know an exact estimate, I'll check when I can!
thank you a lot!
It's approximitely 52 hours and 600g of filament.
In quite slow speeds, 40mm/s
Hello, I used your Alice Thymefield Sword pattern and have issues with the telescopic blade… Printed it 3 times with different setting and the tip always breaks. The other parts are loose and you can pull them out but the second one is to loose and slips out.
Do you have any tips or instruction?
It was my first time trying to do something like that so I kinda knew it might not work as intended! It was more of an optional "treat" that you could actually print the telescopic blade as well and the telescope would need to be something more durable. Does the tip break from the load of it being pulled out as the weight transfers? I'll try to find a fix!
But it seems it somewhat works, so I was atleast on right track?
Hey,
the Track is good ^^
I try to fix it, and give you feedback.
At the moment im doing my 5th Attemempt with changed settings
I could make a non telescopic version so it's fully drawn out and in static form. That would make things easier for starters and there wouldn't be worry of it breaking so easily. I think at least basic PLA won't be enough for the telescope anyway, TPU might be the best as it bends as does her blade.
It's also interesting that one of them actually slips out completely, obviously might be your settings and printer and whatnot but from my experience the spacing I give for parts that need to fit I give them like 0,5mm space in between so that they barely snuggle together. For these parts the ends get wider and wider until the space is like under 0,1mm so that felt it would be impossible for them to get separated or maybe even not be able to move at all inside.
Greetings. I recently got Hugo Vlad Model set so I can hopefully get it printed in metal by some company for my next cosplay, and when i checked one model, the Chest Detail 2 one, it said "areas indicate missing or extraneous surfaces" and it is not auto fixed by the Cura. As it stands I am clueless about 3d modelling, so I wanted to ask, if it would be possible to have a fixed model, or if there is anything I can do? Thank you very much in advance
Hi, there might be some interlapping faces inside that could cause that maybe? I can check them on few days, can't access my PC right now.
Oh, sure, no rush at all. Thanks a lot for responding.
Hmm, it doesn't seem to give any errors on my end and I'm using Cura as well and it's the same file as uploaded. Maybe try orienting it differently, it has sometimes fixed the issue. I honestly have no other ideas.
Ah okay. Thanks you. I will try that.
Hello! I just bought the verso dagger and I keep getting errors i can't upload to slicer? Is there anyfix?
Hi, are you offering a commercial licence?
I bought your Final Fantasy VII | Tifa Lockhart's Armor Set. and it has a lot of errors such as there's a long line or some triangle parts hanging everywhere and the parts are not separated. Please fix it if not please refund me
Here is the screenshot of the issue https://ibb.co/BsZSP8D
Hi! I've updated the files to the latest now, there was some errors in few of the files some time ago but they're now fixed and updated. Can you specify which files had the errors? What program you open them on to print them? I'm using Ultimaker Cura and they print without a problem. If there's still errors after the updated files then the program you're opening them with is the problem.
Yes the error is fix now. Thanks. But can you separate the parts by color please?
I bought your Shinra Public Defense armor and it came out FANTASTIC. I've been looking for the helmet for Ultimate Bunny from The First Descendant, and was wondering if that would be something you could do.
Hello there!! I just bought your file for Sephiroth's nameless katana from Final Fantasy Ever Crisis and I was wondering if you have any future plans to model the sheath as well. If you do I would love to purchase that as well whenever it is complete!! Looking forward to printing the sword :)
Hi, I have a question about the Zenless Zone Zero lighter glove model. I wanted to know if you have a video, image or any document to see in more detail how many parts the document has before buying it.
Currently it's in 2 parts. Cut from the middle roughly.
Hello, I buy to you the shinra infantery guard armor's and I want to know if is that possible to have the file of the hand, armguard and knee in one piece each? Thanks à lot for your time, I hope my english is not too bad (i'm french). Good day to you ~
I think I have them somewhere saved. I'll update the files at some point.
super thanks! ~
Hi! I was wondering If you could please make Cha hae Armor piece from Solo Rising. it is from the mobile game.
Sure! I'll add it to the to-do-list!
Do you have a sword sheath file for Final Fantasy VII Ever Crisis | Sephiroth's "Nameless" Katana?
I don't remember there been a sheath, I maybe incorrect. I would've modelled it as well it there were.
Hello I bought your 15 doctor Sonic Screwdriver & was wondering if i could get the electrical capabilities that you mentioned in the description.
Not at the moment, I unfortunately have no time at the moment.
Hello -- I'm interested in your lethal company player helmet/accessories bundle, but i'm wondering if i can get a blueprint for the helmet w 24 inch scaling instead of 22.5! :)
You can scale the parts by 7% (107% scaling in the slicer) and it'll turn 22.5 to 24.
Hello, I'm trying to print out your Vincent Valentine Armor with a Bambu Lab X1C. No matter what slicing settings I use I end up with the magnet slots clipping through the outer edge. There doesn't seem to be enough material there for the magnet slots to hold the magnets anyway, I'm afraid if I glue them in the plastic will just snap because it's so thin. I'm also wondering how I might go about resizing them to fit me better because I think the wrist is going to end up being too tight based on this test print. I'm wondering how I can adjust the magnet positions to be a bit more centered in the parts so that they don't clip the edges as much. Thanks.
I also noticed for the Arm_2.stl there's like a random slice through it that causes a gap where there should be none as well as some artifacts.
hi! I should print this armor for a friend of mine, I have the circumference measurements he gave me but I don't know how to handle it with bambu studio -. Could you tell me how to adapt it to his measurements? This is my first time doing this:) thank you so much great model! I don't lnow how i can write you a privare message here sorry xP