25 comments

HI, thanks for your interest. Already available here:

https://cults3d.com/en/3d-model/game/vietnam-us-army-m16a1-w-parts

Best regards

Luis

Dear "Twierenga":

Thanks for your interest.
Yes, I have all my USN officer poses also available wearing tie and longsleeved shirt.
Please tell me about scale you need them and also the poses you would preffer, to upload just these on first.

Best regards

Luis

I would like to use 1/48 scale and standing with the arms behind the back would be nice. Thanks

Hi, thanks for your interest. The figure comes for 1/72 scale, thus you have to increase It to 206% to have It available for 1/35. Please tell me if you find any problem upscaling It. Best regards. Luis

Dear Mark:

You have this same figure for 1/48 scale here:

https://cults3d.com/en/design-collections/Holden8702/us-navy-wwii-figures-1-48-scale

https://cults3d.com/en/3d-model/game/us-navy-sailor-world-war-ii-figk13

You can download this figure (for free) typing the code

MARKRSTEWART

Please tell me if you find any problem in doing that or along the printing proccess.

Thanks and best regards

Luis

Hi, thank you very much. Just now I'm not close to my working PC, but I can upload these in your right 1/48 scale on next monday. Free for you, of course. Otherwise, if you do these exactly 1.5 bigger, or 150% bigger, you will have these 1/72 figures exactly converted to 1/48 scale. Hope this helps. Best regards. Luis

Hi Luis, no worries, I'll give the 150% a try, thanks for your help !

great! thank you. Anyway send me a message if you find any problem with the figures. Best regards. Luis

Dear Oli: yes, of course. I will upload them along the week. Thanks and best regards from the sunny Spain. Luis

You ca take a closer look on these figures here:

https://es.pinterest.com/PanzerVSTanks/modern-western-armies-figure-sets/

Hi, these figures are already available here, included 1/72 and 1/87 scales into each model: https://cults3d.com/en/design-collections/Holden8702/nato-armies-figures-1-72-scale

not sure what are you meaning for.

Was looking for bollards, etc. but I found 1/96 scale items in another model. Thanks. Jan

Hi, you didn't attached any image to the message.

Again, you didn't attached any image to the message.

https://www.facebook.com/photo/?fbid=1025390250170111&set=a.105367835505695

My image is at this facebook link.

Hi, thank you for your interest. Well no, I never need these, I haven't any figure or project to use as start point for these pilots. So sorry!

Hi. Oh, so sorry, I don't have any of the weapons except of torpedoes and torpedo racks (no torpedo tubes).

Dear Andreas:
Thanks for your interest.
Well, no, I've seen some comments on figure sets from another Designers where Customers asked for the figures to be uploaded as separate models, this was one of the reasons to not upload the figures as sets. You have to order them one by one.
Anyway, if you want to order all the USN Carrier Figures, I will send you a promo code for two of them for free.

Hello,

Great! In that case, I’ll take the 14 figures—though I’ve actually already bought Figure 1. I noticed that Figure 8 is missing from your collection.

Thanks and regards.

ok, done, you have to apply this code to FIGCR014 and FIGCR013

FIGCR014-FIGCR013-ANDREAS

Discount is 100% (free download) for both these figures.
Figure 8 wasn't successfully done, as I've been using the legs and bodies from another of my older figures to do these crews, probably I didn't like the pose or it was very close to another of the figures. I can't remember why.

Everything worked out perfectly! Many thanks!

Great! Thank You very much. If you want some more poses (kneeling, seated, etc.) tell me about that. I can do these too.

Best regards

Luis

Hi Luis,
Yes, that sounds good. I would actually be interested in other poses as well. Can I send you images via this platform? If not, we can communicate privately. How much would a figure like that cost if you were to design it for me?

Thanks and best regards, Andreas

PS: Sorry for my poor English...

Hi, no problem, you can write in German language and I will send the text to the traslator. If you like, you can contact me by my facebook HOLDEN8702 or my email holden8702sw@gmail.com

Bonsoir, mon ami. Let me see. What's the slicer you are using?

Just now I've downloaded the files with my secondary account and I've do a test in my usual slicer (chitubox).
I can't find any problem with them.
I can send you the files already supported and as .stl files, if this can help. Tell me about that.
In case you would prefer to contact me by email, here is
holden8702sw@gmail.com
Waiting anxiously for your news, some other Customers downloaded these files and no one told me anything about that.
Thanks!

I always use Lychee Slicer. I fixed my issue by converting the OBJ files to ST. It's now is fine. It showed 6000+ holes before

Thanks for tell me.
I will download the Lychee to take a look on it.
And will also start to upload my files for both extensions, .stl and .obj, to avoid future problems.
Best regards
Luis

Hi, thanks for your interest. Yes I have to upload these RN sailors too. Any scale or size you would prefer?

1/72 is ideal for me buy any works as I can resize

Hi, working just now on these sailors for 1/72, I will upload them along the day

these figures are ready now: https://cults3d.com/en/design-collections/Holden8702/uk-royal-navy-figures-1-72-scale

Thank you. Can't wait for the rest.

Hi. Well, I've upload these to make money, I will upload many more of RN figures only if these are interesting for customers and ordered.

I understand. I've just bought 27 or so of them. Hope that helps.

Great, thank You. Tell me what are the RN figures You want to have on first. Best regards. Luis

royal navy summer uniforms. Did you make RN Figures with flashhoods and helmets? Those would be great to have,

I have to work on the summer uniforms. Maybe flashhoods under brodie helmets will be easier (faster).

Dear Friend: Thanks for your kind message. So sorry, these are very old projects, I havent any interest now (or enough time) to work on any more rail shells. All the best with your Projects and best regards. Luis.

Hi. Thanks for your interest. Well, almost all types of slicer software usually works fine with .stl and .obj files. Chitubox, Cura, and also specifically slicers from 3d printers use both these without any problem. Anyway, please tell me what are the figures are you interested and I will include .stl files for them. Best regards. Luis

Hello, Thank you for the reply! I am interested in several of your US Artymen figures. But I need to decide which would work best with the kits that I have. I use Chitubox for my slicer, so I will see if I can use an .obj file. I will contact you regarding which figures I would like to purchase. I saw on Pinterest that you have several more designs that are not listed here on Cults.
On a related note, is there any chance you could create some US artymen from say Grenada (PASGT helmet and vest, t shirt, BDU pants) to go with the AFV Club M102 105mm Howitzer?

Hi. Yes, chitubox can manage .obj files without any problem, I'm using this slicer from many years.
And yes, I already have these modern US Artymen, I have to upload these soon. Just now I've uploaded some renders on them into my pinterest, take a look: https://es.pinterest.com/PanzerVSTanks/modern-us-army-figure-sets/

Hello again! Yes, those ones are close to what I’m looking for, aside from the body armor. The figures you have are wearing the Interceptor body armor used in Afghanistan, Iraq, and still currently in use. I’m looking for crewman with the Kevlar PASGT vests worn from the early 80’s, thru Desert Storm, the Balkans, and were phased out in the early 2000’s.

these PASGT vest are also different from the 1993 Somalia Rangers vests too. I don't have these vests done, sorry.

hi, the price is already very low, really your offer is very insulting for my work

Hi, I can upload the French Streamliner Locomotive Shell, no problem. But please tell me what scale do you prefer. My EMD FL9 files are available now.

I prefer n scale.

ok, I will upload it for the N scale, thanks for your interest.

ok, I've just uploaded the French Streamliner shell files. Thanks.

I see. These have to be "worked" a little, for the scale It's better if I split some parts as arms separately and make hollow all the body parts. I will do that, anyway. Best regards. Luis

Thank you. Always liked your attention to detail in your figures, Let me know when you are done but as I said, no hurry. Jan

I've started uploading some of these 1/20 PT boat figures I had ready from older commissions, take a look.

Hi, thanks for your interest. Yes, I will upload them soon. What scale are You interested in?