124 comments

Thank you for your purchasing the snake (#52)! And thank you for your question! The version of the snake with separately printed eyes is designed for the printed eyes from the file Snake_Eyes.stl. However, these are not suitable for external glass eyes. The photo shows our experiment with creating a slot for external 8 mm eyes. We weren’t fully satisfied with the result, so we didn’t make that file publicly available.
If you’d like it, please send us a message on Instagram or by email - happyflexipets@gmail.com and we’ll send you a download link. Thanks again!

Hi! Sorry for the delay in replying, and thank you so much for your purchase!
We’ve made a pre-painted 3MF file for Bambu Studio and updated the files (please download the archive with the model again). We printed a test, and overall it looks good, but the upper lips have some overhangs, so you’ll need to increase cooling to get the best result. Once we have the opportunity (and get to this design in the queue), we’ll fix that overhang issue.

Hi! The fennec’s height is about 4.8 cm, and the wolf’s is 7.5 cm. That’s in the standing position at 100% scale.
Unfortunately, I’m not sure what the height would be at a 1:18 scale, but if you use a 0.2 mm nozzle and set the layer height to 0.08 mm (or 0.1 mm), you can print them extremely tiny.

A wolf in 1:18 scale is about 4.2cm in height while walking/standing (not seating) and a fennec is about 2.2cm in height under the same conditions. do you think its possible to print them this small?

Yes, we think it’s quite possible if you’re an experienced printer and print the models in versions with a solid head using a 0.2 mm nozzle.

For example, a member of our Patreon community printed the bunnies at 38% of the original size, using a 0.2 mm nozzle and a 0.1 mm layer height. They turned out so tiny!

Hello Yevhenii, thank you very much for your purchase and for your interest in the commercial license.
We offer permission to sell 3D prints of our designs through the Seller subscription on platforms such as Patreon , Tribe by MyMiniFactory, and Boosty (for Russian-speaking sellers).
Please take a look at the benefits of each subscription and choose the platform that suits you best.
We’d be happy to have you among our subscribers!

If you have any further questions, feel free to reach out to us via email happyflexipets@gmail.com or Instagram — these options would be more convenient than continuing the conversation here.

Thank you!

Thank you

Vielen Dank für Ihre Nachricht. Sie haben einen großartigen Hund!
Leider können wir ihn nicht umsetzen. Die Erstellung eines Modells nimmt sehr viel Zeit in Anspruch, und es gibt bereits eine lange Warteliste für neue Modelle.

Hello :) Thank you for purchasing Baron the cat!
For a resin 3D printer, we recommend printing the cat with supports (not directly from the build plate, but with proper supports). This will make it easier to remove it after printing. Also, please check the joints—some areas might need additional supports there.

We haven’t printed it on a resin printer ourselves, and the model was originally designed with only FDM 3D printers in mind.
Please let us know your results!
Thank you once again 🤗💜

Hi, thanks for your question. We're going to release the Maine Coon here on Cults tomorrow. If you're a follower of our account, you'll get notification when the kitty is released. Thank you once again )

Hi Ted, thanks for your interest to our designs and question. We have a Schnauzer in our list to do, it's not in the first places so it takes us a while when we do it, but one day we'll make that doggy.

We've updated the horse body, you can re-download it to get the updated version.
We hope, you'll enjoy it and maybe you'd share your make with us (just go - upload - a make - Horse)
Thanks )

many thanks!

Muchas gracias por comprar a Little Grim y por tu pregunta.

Tenemos 2 gatitos que podrían interesarte:

1. Es un gatito que viene junto con Little Dark. Este gato tiene un faceplate en forma de calavera (funciona igual que la ranita para Little Grim).

2. Es un gato esquelético. Este modelo es exclusivo para nuestros suscriptores en Patreon.

Hi, thank you for your purchase and for your message.
We don't use this printer ourselves, but based on the experience of our community, it's better to use the OrcaSlicer for the Anycubic Kobra 3. Here you can find the slicer.
It supports lots of 3d printers including Anycubic Kobra 3.
As you can see in the screenshot, in OrcaSlicer, Muffin the cat fits comfortably on the build plate at 100% scale. After slicing, all parts of the model remain in their correct positions.

Hi, thank you for your purchase and your question.
Yes, it actually looks odd. During the development of the model, we missed that gap, and we plan to fix it in the near future. Once we update the model, you will receive an email notification and then you'll need to download the archive once again to get updates.

sorry just seeing your reply - appreciate your willingness to modify and hope to redownload soon!

Hi, thank you for your purchases and your question.
I think the issue might be during the extraction of the archive with the files. Please download the archive again and extract it. This should help resolve the problem, as there are no issues with the files themselves.

Hello, thank you for purchasing the model and for your question. We're sorry to hear that :(

The photo shows an English Bulldog that was hand-painted using airbrushing and brushes. The model was created before we had a printer with AMS.

However, we do plan to update all our older models for AMS printing, including adding pre-defined areas for color separation. Once the model is updated, you will receive a notification via email.

We sincerely apologize for the inconvenience. We've now added a note to the model description clarifying that the images show a hand-painted version—hopefully, this will help prevent similar situations in the future.

Добрый день. Спасибо за вопрос )
Коммерческую лицензию можно приобрести через подписку Продавца на Patreon (оплата международными картами, англоязычное коммьюнити, дискорд) или Boosty (оплата подписки в рублях российскими картами, русскоязычное сообщество в закрытой телеграм группе).

Thank you for your question. Thank you for your question. Yes, with a commercial subscription, you can sell prints of our designs in any country. We do not provide exclusive selling rights in any territory; all our sellers have equal rights.

If you have any further questions, feel free to ask, and we will be happy to assist you.

¡Hola! Gracias por la pregunta. Nosotras mismas no hemos impreso nuestras figuras de perros en tamaños muy grandes, pero en teoría, sí, claro que se puede. Y si imprimís las figuras en tamaños grandes, por favor, coloca tu resultado en la sección de Makes. Nos encantaría ver tus impresiones.

Hello. We noticed that you bought the horse from us (thank you very much for your purchase!) and you’re probably writing about an issue with it. Since you didn’t describe the problem in much detail, I can suggest the following solutions: 1) download the archive with the files again 2) unzip the archive again.

If this doesn’t help, please describe your issue in more detail by email happyflexipets@gmail.com or in direct messages on Instagram

Muchas gracias por tu mensaje. Sí, tenemos vendedores en Argentina, pero lamentablemente no podemos decirte cómo encontrarlos en este momento. Preguntaremos a nuestros vendedores y, si alguien responde, te lo informaremos.

¡Hola! ¡Muchas gracias por comprar la flexi caballo! Esperamos que te guste este diseño.
Y sí, por supuesto, puedes imprimirla más grande que al 130%. Nosotros no la hemos impreso más grande, pero nuestros seguidores sí lo han hecho.

Hola te envio foto de como se imprime el caballo a 130% y el pla ya lo he utilizado antes y está bien, es por si me puedes decir porque sale así Gracias

Te adjunto foto por instagram, por aqui no me deja.

https://ibb.co/0pFYFV4P
https://ibb.co/vCRdLCks

Te envío fotos de como salen, sale mal en el cuerpo y en la cabeza hay partes que no están bien terminadas

Gracias por la foto, ahora entendemos cuál es el problema. Parece que tienes la boquilla obstruida. Necesitas limpiarla o reemplazarla por una nueva. Te hemos respondido con más detalles en Instagram.

Hi Robin,

Thank you for your question and kind words! We're really glad to hear that.

Our earlier designs have hand-painted job (mostly, airbrushing) but the recent designs are printed with AMS only. We have Bambu Lab printers: P1S and A1. We leave our 3d print settings and filament info for each design in the 3d print settings section of the description (we attached a screenshot for example).

Hi Roland,

Thank you for your message and questions.

1) We usually don't make keychain versions of our flexi pets and animals but we don't mind if our subsсribers to do so. But we try regularly (one a month) to make an exclusive animal keychain (like in the pic) and all pets and objects for Little Dark (of the Little Dark and her Friends collection) have a keychain version.

2) Yes, of course, we are planning to update all our old designs for color printing and implement the latest version of the head mounting for designs with interchangeable heads. Unfortunately, creating new models and updating the old ones takes a lot of time, so the process is not moving quickly. But we certainly have the intention to do so.

Our models are primarily designed for FDM printers. We haven't tested them with resins, but I think there are some overhang areas in certain joints that could lead to issues with sticking if printed with resin.

¡Hola! Gracias por comprar el modelo y por tu pregunta.

Hmm, no estoy seguro de haber entendido completamente a qué te refieres. ¿Hablas de las configuraciones para el archivo 3MF? Si es así, el archivo ya está preconfigurado, y los demás parámetros debes ajustarlos según tu impresora y filamentos. Si te refieres a otra cosa, por favor descríbeme la situación con más detalles. Si puedes, envíame imágenes, y lo mejor sería hacerlo por email happyflexipets@gmail.com o en mensajes privados en Instagram .

Lamentablemente, no hemos probado imprimirlo en resina. En teoría, si las configuraciones de la resina están bien ajustadas, debería ser posible imprimirlo en resina. Pero lo mejor sería imprimirlo sobre soportes, no directamente desde la mesa, ya que sería más fácil retirarlo. Si lo imprimes desde la mesa, puede ser más difícil quitarlo y existe el riesgo de dañar las bisagras.

Espero que mi respuesta te haya sido de ayuda. Si no es así, puedes escribirnos al correo o por Instagram.

¡Gracias!