20 comments

Hi. Once you purchase the file, you are free to scale the file to however big or small you need.

That being said, I did not model the zord to be able to open up to physically place the DX zords inside the Brachio.
It's a long term goal remodel the file to be able to fit the DX zord but at the moment there is no plans to.

You are able to edit the file yourself to have it do so.

Just updated in the original listing so you will get the body, 1 wing, and one fully assemble zord

So i can just print it and it will be the same as shown in the first picture right

Cause it's written as mini in the bio so confused what size it will come

Please do reply so i can purchase it

Hello. As I noted in the description, the file is sized at x = 60.8 mm, y = 52.7 mm, z = 64.5 mm. I've just updated it to show the size in inches.
As also noted in the description, the model was made to go with the deluxe Brachiozord, which came with minizords. So if you were to print the file as is, the print with be small.
However, when you purchase the file, you should have the capability to scale the file to however big or small you want, as you now own the file.

Thank you for your interest.

Can you please lower the price for dragozord

There is an option on the page to "make an offer" if you want to make me an offer for a lower price.
I will consider a new price but I dont see why I should lower the price.
The original listing included the body and the wing in separate files. In this new listing you get the body, the wing, and the whole zord. Compared to the original 2 file listing, that's 3 separate files, one of which I custom added for you.
If anything I should raise the price for the extra work.
I believe I set the price fairly low considering the amount of work I put into this model.
Again, if you would like to make a offer, I will loo and what you offer and consider it.

I have sent offer please check and revert

I'm sorry, I do not

Hello, Thank you for your purchase. I've reuploaded the file. The model was scaled up 1000% to work on Chitubox Slicer.
If the file isn't scaled properly when you import it, try inputing these dimensions for the model size, which i did note in the page description.

3D Model Size:
x = 28.4999 mm
y = 28.4999 mm
z = 114.703 mm

Hello. While the Tyranno stl model is available for purchase, I do not have the clip cover modeled. I dont not plan on modeling it because I am too busy model and do experimental test prints to make it available for purchase. Apologies

Thank you, I saw that you purchased the file already, but I'll answer it for everyone else.
The file is only for the base, not the Zordon face.

I bought it thinking it was complete :(

Just what I wanted. Thanks so much!

Thank you for your purchases. Unfortunately I am not knowledgeable in this sort of troubleshooting. I'm also not sure what you mean by gaps.
I can only guess that I kept all the elements in the models as individual elements and that I did not merge the model as one object.

Apologies for the late reply. I guess it depends on the model and also how much it'll affect my real world job

Hey, sorry it took awhile to get back to you, is there a way to contact you privately

Message me through my Etsy store.
https://www.etsy.com/shop/GWWRRB3D?ref=seller-platform-mcnav

I'm hesistant to put my email in a public thread, so apologies if you have to create an account to reach me.

Brachio is literally the next thing to be modeled. I have to take care of life stuff first. It'll be a while but it will be soon!

Thanks, I'm glad you like them! That's great that you printed them that large. Unfortunately, I dont see those photos. I'm assuming I found your profile because you have some Power Rangers photos. Did you have them on private?

I might. You may have to send a Friend Request to see them.

Update: You can check out my Makes page for the images. :)

Hi. Currently at my skill level, it's a definite no. I am strongest with geometric robot shapes. Dulcea has a natural organic shape and I have not tried to learn sculpting in that way.
You should check out @rangers_remorphed on Instagram. They have been working on a Dulcea figure. Maybe they have the file for sale.
https://www.instagram.com/p/DBrmdK9tBSA/?utm_source=ig_web_button_share_sheet&igsh=MzRlODBiNWFlZA==

Hi, I'm currently not planning to make the MMPR Megazord

I do have an IG, however I do see that you have an Etsy. Just to keep myself organized, how bout you message me on Etsy? GWWRRB3D is my store.

Sounds good and message sent

I'm not fully understanding your question. I will assume you are asking about the rest of the Dino Thunder zords.
Yes, I do plan on modeling the Pterazord, Tricerazord, and Tyrannozord. They will take some time so please be patient.

Yes

The rest of the Dino Thunder Minizords are available!

The rest of the Dino Thunder Minizords are available!

Hello, currently I am not planning to model any of the other dinozords. I only decided modeled the Dimetrozord because it was missing from my Brachio set, and I modeled the Stegozord and Dragozord because Bandai never made them. Maybe when there's another film industry strike that will give me time to model the rest of the dinozords, but not anytime soon.

As for the Wild Force zords, and for that matter, Mezodon, I use the actual deluxe toys to take measurements off of to make the model as accurate as possible and so they scale properly as well. I don't own any of the Wild Force zords or Mezodon and I'm not planning to purchase them as I do not have space on my shelf for them.

Thank you for you interest. I apologize that I could not help you. Enjoy!

How is it not importing, is it giving you an error message? What program is it? Is it possible thats it's scaled really small on your screen?

I don’t know which model you are referring to, but at the time of this message, yes, the model works for both left and right sides. Just mirror the model to accommodate the side that you need