/https://fbi.cults3d.com/uploads/user/avatar/29586661/dt3d_logo.PNG "DT3D"){kind=logo}
Designing practical 3D-printed parts and CNC-machined components for everyday use. Focused on function, fit, and durability rather than showpieces.
👋 Hi everyone! This thread is public, so let’s keep it nice and respectful. No ads, spam or nasty stuff!
🇨🇭 User's country: Switzerland
🌐 Member’s preferred language: English. You can translate online via DeepL.
💡 Are you referring to a particular model? Add the link, title or model number.
🖼️ Want to post photos? Use a free host like ImgBB and paste the links in the message.
✍️ Writing Tips: Use the Markdown format to structure your text and make it more readable.
I accidentally bought the same one twice. I am buying several others, can we fix this duplicate?
Hi there, yes absolutely, let me check and delete the duplicate purchase.
Done, you purchased the 60-75mm duct adapter twice and this is corrected. Kind regards from Switzerland
Thank you!
Heya, I'll print an post photos of the print if youy give it to me for cheap/free Universal Recovery Board Mount - 3D Printable STL and 3MF Files
Hi Glen, I don't offer free or discounted products. Files are available at the listed price and reflect the precision engineering and quality that goes into every design I make. Thank you for understanding
Hello, I just called several metalworking companies to print one of your designs, but they're asking for the drawing in PDF format. Is it possible to get it in this format in addition to STL and 3MF? Thanks in advance!
hi there, what product are your referring too as this information is missing. I usually supply both files, depending on the product in question though.
I see it is about the headlight mount. I do offer this as a metal product by the way CNC milled in my shop. perhaps this is the better route than 3D printing it through another vendor
Yes, those are indeed the brackets for lowering the headlight on the MT09. I need them for a local milling company, as I think importing them is too expensive for me.
If you were from Spain, I would buy them without hesitation!
Switzerland here.
Is it possible to obtain the drawing in PDF format so that it can be given to the machinist to mill the supports?
I just called another company and they told me they can also do it with AutoCAD drawings (DXF or DWG). Do you have either of these two formats?
Hi there, work in 3D step files, not in autocad - i am sorry, i do not supply those, nor would i want my designs to be copied by a 3rd party as you can probably understand. You can use the 3mf and stl files supplied with your purchase to 3d print your mounts for yourself, but i am not comfortable handing my designs to a company i have no affiliation with. Otherwise, the CNC milled version is available in my shop. Kind regards, Alex
Yes, I completely understand, but I'm worried the plastic won't be durable enough. Thanks for the clarification.
Hi,
I purchased the DGX Spark 10-inch rack mount and the cutout is too tight. I have 2 sparks, one is a Dell and one is Gigabyte. The Dell spark will fit if I remove the bottom cover but the Gigabyte AI TOP does not fit. I am attempting some slicer changes to get more clearance but wanted to ask if a larger opening can be made. I measured a height of 52.50mm
Hey dude, the mount is designed for the Nvidia DGX Spark and not for the Dell or other Blackwell designs, I am actively working on those and I can make them available since you already purchased one. I will make a universal model so the other blackwell models will fit too. bear with me.
Would you send me your email so i can send you the update for your models of blackwell GPUs
No worries, completely understand. I did some trimming to get it to work. Works out great. stephenlopezz@protonmail.com
Hi, I recently paid for and downloaded this model: https://cults3d.com/en/3d-model/tool/150mm-6-inch-magnetic-duct-coupler-3d-printable-quick-connect-hvac-fitting
In the description, it notes it requires 12 magnets per side:
Magnetic Quick Connect: Designed to accommodate 8x5mm, 8x4mm, or 8x6mm magnets, allowing you to select the desired gripping strength. Each side requires 12 magnets, totaling 24 magnets for a complete coupling (magnets not included).
I got this model to align with existing 12 magnet 6" ports that I already have installed - do you have a 12 magnet model available that I can swap this one for?
Hi there, yes i can quickly design that. can you provide some measurements so i can make the magnets positions fit exactly your existing parts. that would be helpful, otherwise it is guesswork to match the same position
you can also send the stl if you like, i can measure in the file and match the magnet position to my design
Sorry for the delay - the existing dust connect port I have was actually purchased off Etsy (I've since bought a 3D printer):
https://www.etsy.com/listing/1835504070/6-inch-magnetic-dust-collection-adapter?ref=yr_purchases
I can try and get exact measurements for you this evening. What measurements would be most helpful?
Thanks again!
no worries and on standby
Does the download for the traction board mounts include the design for the four knobs and a list of the remaining hardware parts needed to complete the project? Would I need anything additional to mount it to either a round steel tube or expanded steel mesh? (I have a Gobi rack.). Thanks a lot.
Hey Dude, the M10 Thumb screws you mean. No they are not included but M10 thumb screws can be found for free to print on lots of platforms. It is just the mount i am afraid, no hardware included naturally.
I am interested in your "GreenLiving Made Simple: SpaceSave WallPlanters for HomeGarden" model (https://cults3d.com/en/3d-model/home/greenliving-made-simple-spacesave-wallplanters-for-homegarden) but I need it to be waterproof (I don't want to water the plant and have water leak out the bottom!). Will the settings you describe achieve that? Also, I have a Bambu Lab H2C with Bambu Studio v2.4.0.70 but there is no "Strong Standard" mode in that current version of Bambu Studio. Could you elaborate what you mean (or give the Bambu Studio settings you used to get "Strong Standard")? Thanks in advance!
easiest thing is to increase wall count, then it will be water tight and durable. Kind regards
Actually, I was more wondering if the settings you recommend (4-6 wall perimeter walls) have been tested and confirmed watertight (add water to fill the planter and wait to see if there are leaks through the sides or bottom). Does it pass that test?
this planter has drainage holes though as per description, right at the front and lowest point of the entire pot. So it will definitely leak if you overwater. I have them drip into pots underneath. Did you want this version without any holes?
Hi, what size threaded insert do you use for the adapter part please? Thank you
For the diesel heater adapter! Sorry!
Hi there, threaded inserts? The heater couplings do not use threaded inserts
There are clearly what looks like brass inserts in the parts in your photos. What size inserts are they??
ah, now i know what you mean, those were M5 standard threaded inserts. 6-7mm long if memory serves well, you dont have to use them though, its a through hole.
Hello, the Land Cruiser logo isn't fully glued to the rest of the grille. We're requesting a refund.
I've been using 3D printers for a long time. I also bought the Land Rover one, and it was perfect. Unfortunately, this one isn't firmly attached to the grille enough, making it more fragile. If you think there's a solution, or if I've made some incorrect settings, please help. Thanks.
What printer you got? Filament? I am sure I uploaded a pre-sliced version for ASA/ABS for bambu printers. I have printed several, never have I had any issues. Make sure your extrusion rate is calibrated correctly and that you use the same filament type for the colors. There is zero gap in the design between the colors so it is effectively one connected piece with plenty of surface area between the colors to adhere together. Mind you, i usually print in ABS/ASA which is tougher with better layer adhesion than PETG.
Hello, please advise on Laser Fixture for Euro & UK Business Cards, Round Parts, Bar Stock and Coins parameters such as tolerances and whether additional processing of the part is required after CNC machining. I plan to pass on these parameters before milling so that the technician knows what to do. Thank you, have a nice day.
That really depends on your machine, your tools, what tolerances you want to hit etc. there is no straight answer and I am sure your technician knows what to do when he is programming his CNC. This is just a model. I am also happy to make one for you if you like, I have a shop and sell these
do you have email ???
Good morning let me know
Hi Gustav. the height of the vent going over the window is 42.2mm for the 100mm version of the window vent.
Sorry here's the item I am referring to https://cults3d.com/en/3d-model/tool/100mm-4-inch-tilted-window-ventilation-duct-adapter-3d-printable-stl-file
I think it was around 7cm but I will check properly tomorrow when on the computer
Hello what's the height of the duct not the circle but the section of the rectangle
Hey,
saw this https://cults3d.com/en/3d-model/home/lawn-trimmer-replacement-blades-3d-printable-parkside-einhell-digital-stl-fi
Using a PRTA 20-Li C3, you say it will fit - no adapter needed. Every 3rd party version I see has some adapter + blades. How should I install them here?
Thank you!
Are you for hire? I’d like to create a modified version of your over the window duct system.
Hi there, yes, i do customer designs. Let me know what you need and i shall re-create it. KR Alex
my download link for invoice 176 doesn't work - Weather proof and scalable Universal Duct Coupling with Quick Connect Hose Adapt
You didn’t buy anything, hence no invoice
Would you care to share your CAD files for the trekpak dividers? I'm working on 2 different pelicans I'm trying to layout and organize and would love to be able to tweak around with custom options in Fusion 360. Thanks!
https://cults3d.com/en/3d-model/home/modular-storage-dividers-drawer-dividers
Clemson Tigers Football Team Lightbox - Multi-Color 3D Design Files and BambuLab Sliced Complete Fileset
Not letting me obtain three of the four files. I would like to print this for my wife.
Clemson Tigers Football Team Lightbox - Multi-Color 3D Design Files and BambuLab Sliced Complete Fileset
Not letting me obtain three of the four files. I would like to print this for my wife.
Clemson Tigers Football Team Lightbox - Multi-Color 3D Design Files and BambuLab Sliced Complete Fileset
Not letting me obtain three of the four files. I would like to print this for my wife.
Clemson Tigers Football Team Lightbox - Multi-Color 3D Design Files and BambuLab Sliced Complete Fileset
Not letting me obtain three of the four files. I would like to print this for my wife.
Clemson Tigers Football Team Lightbox - Multi-Color 3D Design Files and BambuLab Sliced Complete Fileset
Not letting me obtain three of the four files. I would like to print this for my wife.
Hi, I'm interested in this product: https://cults3d.com/:2057688
Does the file work for CNC machining programs or only 3d printer platforms?
I machine this constantly so yes, you can machine it. Remember though due to the odd shape, on a 3 axis mill you would need to flip it 3 times to reach all sides
Great, any further recommendations for the CNC technicians? I would actually send the file to a shop, I want to make sure I get it right the first time because they charge by the hour.
Hey I bought your micrometer stand but why is it a text file?
Hi there, it is certainly not a text file. you can even see the stl preview. please recheck that you downloaded correctly and if you still have trouble, do send me your email so i can send it to that in case Cults3D gives you trouble. Kind regards
Alex
Hi there, i do apologize, i just noticed this message. Will send right away
what size are the screws and bolts
This was designed for M5 initially but you can certainly drill them out a bit if you prefer bigger hardware