79 comments

Hi! I've added the corrected model. It's available at this link:
https://cults3d.com/en/3d-model/game/3d-model-dshk-1938

I want the most solid version possible, without any empty spaces inside, because when 3D printing with SLA, it creates suction cups that I can't completely handle.
Currently, there are many hollow cylindrical sections inside the gun barrel, in the handle, in the magazine, and many other places.
Please update this for me; I don't need such detail for a model that's only 1/6 - 1/8 scale.
Many thank for your support!

I'm afraid that's all I can do. I'm sorry the quality of this model isn't to your liking. I can offer you any other model I have for free.

Hi! I printed this model at 1/48 scale, with a 250mm wingspan. You'll need to scale it up before you can print it. This won't affect the print quality.

Much thanks friend !

Hello!
I'm very sorry, but I'm afraid I can't help you right now. Unfortunately, I'm currently unable to modify the file for printing, although technically this could be done in BLENDER or another program for working with STL files.

Hi Derek!
Thank you for your interest in my models! I’d be happy to collaborate with you. Please let me know more about which models you’re interested in and how you plan to sell them. I’d be happy to help.
collectibleminis@gmail.com
Best regards,
Valentyn.

I'll email you and thanks!

Hello! The model is available for download. I would be grateful if you could share the photo.
https://cults3d.com/en/3d-model/game/3d-model-zastava-m59-66-pap

Unfortunaly model is not solid, so 1/35 scale is to small to be printed because thin walls on model :-(

Hello! I cannot guarantee that the model's detail will be satisfactory at this scale. If it works out, I would appreciate a couple of photos.

I have send it to my engineering guy with the dimensions and he told me that it's ok in matters of a 3d printed gun

Hello! The model can be downloaded via the link! I would appreciate it if you could post a photo in the section - MAKES

Good day. I make test print and send photos to Makes. There were some problems with the barrel when printing. The barrel walls are too thin.

Hello! The model can be downloaded via the link! I would appreciate it if you could post a photo in the section - MAKES https://cults3d.com/en/3d-model/game/3d-model-h-k-416

Hello! Unfortunately, these models are designed for printing at a scale of 1/6. It is not possible to print individual elements in acceptable quality.

Hallo Cynthia! Auf meiner Site sind jetzt kostenlose Modelle russischer Waffen verfügbar. Ich denke, Sie können damit beginnen. Bei Interesse an einem bestimmten Modell stelle ich es gerne kostenlos zur Verfügung. Vielen Dank für das Kooperationsangebot. Viele Grüße, Valentin.

Hi! You can download the model from the link: https://cults3d.com/en/3d-model/game/3d-model-barrett-mrad-mk22
I would be grateful for feedback

Thank you! I will let you know the outcome.

Hello gentlemen!
This model is not a scan,
although it corresponds to the original.
For full confidence, it is desirable to specify the dimensions, which I did not do.
In 3D printing this model can be enlarged to 1:1 scale without problems.
I will be glad to help you in any way I can.

Hi! You can download the model from the link: https://cults3d.com/en/3d-model/game/3d-model-h-k-mp5a3
I would be grateful for feedback

Hi! You can download the model from the link: https://cults3d.com/en/3d-model/game/3d-model-mg42
I would be grateful for feedback.

Thank you very much for your document. I will fulfill my promise: I used a ratio of 1:35 to 1:72 to print them as a whole, but both failed because their structures were too thin to support the complete model. I found that there were separate 1:35 files in the file, and I also printed them. I added different angles of support for them, which can be printed, but their barrel outer walls are too thin and will deform under gravity, making it very easy to damage them when dismantling the support. I can only assemble a weapon, and their quality is very average. I will not keep this weapon, I will discard it. I think it is necessary to thicken the sleeve part, which is just for my testing. Perhaps the resin and printer parameters are different, and can only be used as a reference.

Hi! You can download the model from the link: https://cults3d.com/en/3d-model/game/3d-model-pgm-hecate-ii
I would be grateful for feedback.

merci beaucoup je test et vous fait un retour

Collectible_minis
Вітаю! Я можу скинути модель безкоштовно, саме для того, щоб переконатися, що її можливо роздрукувати та визначити її недоліки та плюси)) Модель по частинах, для модифікаціїї апріорі не може коштувати 2 Евро, а тим більше бути безкоштовною, якщо ви, звістно розумієте, про що я)))