TIV 2 Tornado Interceptor High Detail Fully Functional (UPDATED)

PLEASE READ EVERYTHING BEFORE PRINTING OR ASKING A QUESTION!!!!!

This thing is insane, fully moveable flaps, spikes, turret, airbags, and quite large. It comes with the option for parts included for the 2009-2011 versions and parts for the 2024-2026 versions. I also recommend watching the demonstration video, which shows the differences between the parts and how they work.

2009-2011 includes:

• Back Flap (2x8mm magnets recommended)
• Older style "T" shaped mesonet tower
• Older style front flap
• No lightbar on top

2024-2026 includes:

• Rear spikes
• Newer style mesonet
• New style front flap
• Lightbars on the top of the body

(you also need to supply toothpicks, amounts needed are listed in the build video)

THE MESONETS ARE EXCLUSIVE TO OUR DISCORD
to access the free file to both mesonets, you must join our discord and go to @foog89's post in the 3d print channel, link to it is down below.

Besides that all of the other parts are universal, including the new and improved airbag system! It is WORLDS better than the older version and was thoughtfully commissioned and designed by a member of my team on my discord, Linked below!

WARNING:

This model is NOT FOR BEGGINERS, THIS IS A COMPLICATED MODEL. It is not my fault if you buy this and can't figure out how to put it together or how to print it. I have supplied a build video down below that is quite detailed in terms of setup. I am also happy to help with anything and I'll also put my TikTok and my discord below. PLEASE SHARE YOUR BULD WHEN YOUR DONE!!! I'd love to see it!

BEFORE BUYING! Make sure your printer is at least 220mm cubed, you can slightly scale the model up and down but not much because of tolerances.

I also recommend to watch most if not the whole build video before you start printing, you can also watch the demonstration video if your interested in how it works. At least watch the print settings section. The video is not the highest quality and I myself made a few mistakes throughout building it but I was sure to note of that. I will also put the amazon link down below for the magnets needed for printing the 2009 version. Just make sure that your doing the step right. TAKE YOUR TIME DO NOT RUSH BUILDING IT!!! You will also need to copy some parts, the details for that are in the build video.

Links:

Discord: https://discord.gg/6pdjwges6

TikTok: https://www.tiktok.com/@_twistok_

Build Video:https://www.youtube.com/watch?v=-XXJU46sE-w

Demonstration Video (2009-2011): https://www.youtube.com/watch?v=9EGElMrUuQY&t=5s

Demonstration Video (2024-2026): https://www.youtube.com/watch?v=9Z09OPb49LU

Amazon link for magnets:
Magnets: https://www.amazon.com/Fridge-Magnets-Refrigerator-Crafts-Whiteboard/dp/B09XMJBRFZ/ref=sr_1_6?crid=D3M7CBDWWXYR&dib=eyJ2IjoiMSJ9.YhaSlZXAlmGj3VSxbIsEQUq2MvNIsIxyj0ZuJYf3c3wVfVlsf9Nb_SXFTLOig2HOa4RN2TH5uTFUhm4_6qCb-rCruS6EjT7rOc_2wEqmPQG73hYe864N8jhc_-j7IkB06ZGb-W-zKl6edBarMpe9LENVkXCqLG-kOkxgDPbot07J73QFVU82pLDEkiG5VlVGx7ToB0qUS4c4FU-UGt0_6IWyL_fX3zl1UHrJV_xDAgk.w-pNoU5R3VsXpBWjXr4GV4XwvkJBbb1JcRC-MEfa8vA&dib_tag=se&keywords=8mm%2Bmagnets&qid=1778888144&sprefix=8mm%2Bmagnets%2Caps%2C125&sr=8-6&th=1

NOTICE!!!

These files are under a private use license. selling or sharing of the files, as well as selling models made from these files is strictly prohibited and illegal. Doing so will result in immediate suspension of whatever your doing and may result in legal action. I try to be nice about these matters as long as your respectful and communicative to me and my team. Thank you!

TIV 2 Models

Layer Height: 0.20mm
Brim type: Outer brim only
Supports: ON and in Tree Hybrid mode

All airbag pieces:

Layer height: 0.24
Infill: Gyroid infill
Outer brim only
Wall generator: Archine mode
No supports needed for these parts

Parts that need multiple pieces (applies for both models and airbags)

Spike Base: 2x
Spike holder: 2x
Rear Axle: 2x
Rear outer wheel: 4x
Rear inner wheel: 4x
Front Wheel: 2x
Airbag Spring: 3x
Pins for airbags: x2 (different tolerances given, print what works best )
(All side windows need to have 2 of each printed)

DO NOT auto orient the parts, they will come pre-oriented when you import the file into your slicing software. HOWEVER, some printers may be slightly too small or some software's ignore this fact, just make sure everything looks right and use some common sense and thing "yeah that looks right" before you hit print