Skip to content
Advertising

M60

thumb.jpg M60
PXL_20221221_120423631.MP.jpg M60
PXL_20221221_120452688.MP.jpg M60
PXL_20221221_120458494.MP.jpg M60
PXL_20221221_120511928.MP.jpg M60
PXL_20221221_120527286.MP.jpg M60
PXL_20221221_120619311.MP.jpg M60
PXL_20221221_120636429.MP.jpg M60
PXL_20221221_120729227.MP.jpg M60
r1_a3.png M60
r1.png M60
r2.png M60
r3.png M60
r4.png M60
r5.png M60
thumb.jpg M60
PXL_20221221_120423631.MP.jpg M60
PXL_20221221_120452688.MP.jpg M60
PXL_20221221_120458494.MP.jpg M60
PXL_20221221_120511928.MP.jpg M60
PXL_20221221_120527286.MP.jpg M60
PXL_20221221_120619311.MP.jpg M60
PXL_20221221_120636429.MP.jpg M60
PXL_20221221_120729227.MP.jpg M60
r1_a3.png M60
r1.png M60
r2.png M60
r3.png M60
r4.png M60
r5.png M60
Advertising
Share
Add to
Make
?
Creation quality: 5/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
2 files (ZIP) Close
  • m60a1.zip
    • hull/arch_2.stl
    • hull/arch_3.stl
    • hull/arch_front_left.stl
    • hull/arch_front_right.stl
    • hull/arch_front_right__pipe.stl
    • hull/arch_front_right__pipe_mount.stl
    • hull/arch_rear.stl
    • hull/bulkhead_front.stl
    • hull/bulkhead_front__mount_switch.stl
    • hull/bulkhead_middle.stl
    • hull/bulkhead_middle__mount_rotation.stl
    • hull/bulkhead_rear.stl
    • hull/cut/top_1.stl
    • hull/cut/top_2.stl
    • hull/hatch__driver.stl
    • hull/hatch__rear.stl
    • hull/section_1.stl
    • hull/section_2.stl
    • hull/section_3.stl
    • hull/section_4.stl
    • hull/section_5.stl
    • hull/section_front.stl
    • hull/section_rear.stl
    • hull/section_rear__tow_hook.stl
    • hull/top_main.stl
    • hull/top_rear.stl
    • hull/top_rear__screws_cover_bolt.stl
    • hull/torsion_cover_1.stl
    • hull/torsion_cover_2.stl
    • spec.xlsx
    • stuff/barrel_support.stl
    • stuff/barrel_support_cover.stl
    • stuff/hook.stl
    • stuff/light.stl
    • stuff/light_protector.stl
    • stuff/speaker_mount.stl
    • stuff/track_paperclip_measure_44mm.stl
    • stuff/turret__handle_left.stl
    • stuff/turret__handle_right.stl
    • suspension/drive_sprocket.stl
    • suspension/drive_sprocket_cover.stl
    • suspension/gearbox.stl
    • suspension/idler_lever.stl
    • suspension/lever.stl
    • suspension/limiter_common.stl
    • suspension/limiter_front.stl
    • suspension/limiter_rear.stl
    • suspension/support.stl
    • suspension/support_mount.stl
    • suspension/support__rubber.stl
    • suspension/support__rubbered.stl
    • suspension/torsion_hard.stl
    • suspension/torsion_soft.stl
    • suspension/track.stl
    • suspension/wheel.stl
    • suspension/wheel_cover.stl
    • suspension/wheel__rubber.stl
    • suspension/wheel__rubbered.stl
    • turret/barrel.stl
    • turret/elevation_adapter.stl
    • turret/elevation_mount.stl
    • turret/gear.stl
    • turret/hatch__commander.stl
    • turret/hatch__gunner.stl
    • turret/machine_gun.stl
    • turret/main.stl
    • turret/mount_balancer.stl
    • turret/rear_cargo.stl
    • turret/recoil_arm.stl
    • turret/skeleton.stl
    • turret/top.stl
  • turret_A3.zip
    • barrel.stl
    • canister.stl
    • canister_mount.stl
    • cargo.stl
    • commander_turret.stl
    • commander_turret__gear.stl
    • commander_turret__hatch.stl
    • commander_turret__mg.stl
    • commander_turret__servo_gear.stl
    • cut/barrel_1.stl
    • cut/barrel_2.stl
    • cut/connector_pin.stl
    • cut/main_1.stl
    • cut/main_2.stl
    • elevation_adapter.stl
    • elevation_mount.stl
    • gunner_hatch.stl
    • handle_left.stl
    • handle_right.stl
    • main.stl
    • mantlet.stl
    • recoil_arm.stl
    • skeleton.stl
    • top.stl

Learn more about the formats
Last update
Publication date
Design number 977198
Design author RC_3D_Tanks
RC_3D_Tanks

RC_3D_Tanks

Certified account
Issue with this design? Report a problem.

3D printer file info

3D model description

[14.10.2023 10:00 UTC | A3: added missing gunner's hatch]

Fully functional radio controlled model of M60 / M60A3.
Can be turned into stand model by using plastic gearbox rod (check Google Drive)

Archive contains two turrets: regular one and A3 turret. Both are replaceable, so single hull can carry both.

READ BEFORE YOU BUY

Manual, electronics │Live preview | Video

Based on Heng Long TK-7.1. Does not support BB unit.
supported:
- engines \ gearboxes (plastic / metallic)
- turret rotation
- canon lifting
- smoke
- x2 40mm speakers
- fully functional suspension
- recoil & elevation on SG90 servos

Some numbers:
scale: 1/16
width: 230mm
length: 430mm
height: 180mm
weight: 2,540 g
required printer area: 180x180

Please contact us on Discord in case of any troubles

3D printing settings

PETG is preferable. Use 40-50% infill for levers (balancers)

Categories

All categories › Various

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.