Skip to content

Falcon Heavy - with stand (single print rocket)

Creation's quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

Updated 7-8-18 Improved realism of landing gears and added more strength to hold side rockets on.

I wanted a single print set of rockets. This is the Falcon Heavy with launch stand. The rocket when sized to 40% can be a single print on CR-10 mini. After about 15 prints later, I came up with this. The stand is capable of holding the Falcon 9, Falcon Heavy, and Falcon 9 big fairing. (plans for other models as well). Without reduction the model is to scale at 1cm to 1 meter.

Since I tend to have hidden compartments, I could not resist. Under the stand is a hidden compartment.

UPDATE 5-27-18: The clamp file and stand that was uploaded was older one. The stand can result in failed print at top when sized to 40%. I've swapped the two files out as of 7:20am pacific time. If you have one prior, I apologize. After reducing the file 40% is when it fails. The newer file corrects this. If you printed the old file at 100% and or sliced it, it will work fine but not for smaller printer. BUT the new file (old one deleted) will fix this issue. As far as the older clamps, has slightly bigger opening. Now the proper one is included. Although the old one will work, just not as well.

for Falcon 9 Big Fairing rocket, go here:



  • 3D file format: STL
  • Publication date: 2020/01/14 at 18:09





I'm an engineer, I love to design in blender 2.93 I try to contribute mostly useful or loved items. If you like my work or just want to say thanks, you can give me a tip: Donate
It would be much appreciated and it will help me to continue to share my designs with the Cults Community.



Issue with this design? Report a problem

Best sellers of the category Various

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!