Artemis Snowpeak CP2 Full Tactical Conversion Folding Stock

A full tactical conversion for the CP2 with functional magazine and folding stock. It completely replaces the original stock and gives you the ability to add an AR stock, as well as a standard AR style grip.

There is a moderator included, but the old one still fits as well.

If you are interested, I can add an option for a regular buffer tube thread. Just let me know.

There are two magazines which can be inserted into the stock and can hold any items you want. I made a tray which slides into the magazine so you can put some foam with pellets in there for the single shot tray. Or you can use the magazine holder to store up to 2 spare loaded magazines.

It should also fit the Diana Chaser. And possibly all other variants.

List of requirements:
1. M4x12mm countersunk screw (main body)
2. M5x25mm screw + M5 nut (grip)
3. 2x M3x10mm screw (handguard rear)
4. M5x12mm screw + M5 nut (handguard rear)
5. M3x16mm screw +M3 nut (handguard support)
6. M4x12mm screw + M4 nut (handguard support)
7. Small spring from a ballpoint pen (magazine release)
8. M3x16mm countersunk screw (magazine release)
9. 12mm OD spring (magazine)
10. M5x30mm screw + M5 nut (stock hinge)
11. 2x M3x12 screw (stock hinge)
12. Small spring 7mm OD, 25mm long (stock hinge)

The buttstock is not included in the files, but you can download the one in the images on my profile.

The assembly document is included in files.

Let me know if there is anything wrong, or if you have any questions.

The intended print orientation is included in the assembly document.

Please note that the largest piece is almost 250mm in height.

Perimeters: at least 3, for the hinge part you need a lot of walls.
Infill: at least 30%
Support: no, though it might improve the magazine bay