Skip to content

Xiaomi Wowstick Case

Creation's quality: 0.0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

A simple Xiaomi Wowstick case - holds the wowstick 1F+ with a bit still installed (because i'm too lazy to take the bit off every time :) ), plus the three tool tubes it comes with. I didn't add in space for the cable or any other accessories, as I tend to charge it at home, and carry minimal equipment when out in the field. Plus microUSB chargers are everywhere anyway :D

Print both halves, lightly sandpaper the backs of four pairs (8 total) of 8x3mm magnets (sanding them gives better adhesion), and glue them into the recesses in the case with super-glue (cyanoacrylate) or similar (two-part epoxy, gorilla glue etc). Tolerances should be good for pretty much any printer.

No supports needed. 0.2 layer height or less for better accuracy on the curves. 20% infill recommended for cleaner finish, and 3 perimeters for strength, but optional.

3D printing settings


3D printer file information

  • 3D design format: STL Folder details Close
    • wowstick_case1_v1.stl
    • wowstick_case2_v1.stl

    Learn more about the formats

  • Publication date: 2021/07/26 at 01:07





Issue with this design? Report a problem

Best sellers of the category Tools

Add a comment

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!