Ultimate 3D Printer Bed Cleaner & Adhesion Tool - Perfect First Layer

Say goodbye to first layer adhesion issues!

One of the most common problems in 3D printing is poor bed adhesion. This functional and easy-to-print Bed Cleaning Tool is designed to perfectly clean your build plate, ensuring a flawless first layer every time.

https://www.youtube.com/watch?v=vtUcsH3yWXs

By simply placing a small piece of microfiber cloth or a wet wipe between the top and bottom parts and tightening the cap, the cloth is securely clamped. You can then apply IPA (Isopropyl Alcohol) or your preferred cleaning solution to wipe your build plate evenly and effectively.

Key Features:

Fixes Adhesion Issues: A clean bed is the secret to a perfect first layer.

Secure Clamping Mechanism: The threaded top cap tightly presses the cloth in place.

Storage Container Included: Comes with a custom-designed storage box to keep the tool clean and ready for your next print.

Easy Assembly: No screws or extra hardware needed. Just print and use!

Zero Waste: Use scrap pieces of microfiber cloths instead of buying expensive cleaning pads.

A must-have maintenance tool for every maker's workspace!

This model is highly optimized for hassle-free 3D printing. It requires absolutely NO SUPPORTS, making it a perfect print for beginners and advanced users alike.

General Print Settings:

Material: PLA, PETG, or ABS (PETG recommended if using strong chemicals)

Infill: 5% - 15% (Gyroid or Grid recommended)

Supports: None (No supports required for any part)

Layer Height: 0.20mm (Standard)

Wall Loops / Perimeters: 2 or 3 for added strength

Print Time & Filament Usage:

(Note: Estimated times are based on high-speed printers like the Bambu Lab P1S. Your actual print time may vary depending on your machine's speed settings.)

Total Print Time: ~2 Hours 20 Minutes

Total Weight: ~50.03 grams

Part-by-Part Breakdown:

Bottom Part: 18.93g | ~48 min | No Supports

Top Part: 13.39g | ~34 min | No Supports

Knop Part: 4.78g | ~23 min | No Supports

Drying Container: 12.93g | ~34 min | No Supports

Assembly Instruction:

Place a small cut of microfiber cloth over the bottom part, align the top part over it, and screw the top cap down until the cloth is firmly clamped.