Wacom Intuos pencil holder / Wacom Intuos pencil holder updated in printables. Link in description

Update 02/07/2025

New Remix Avaiable: https://makerworld.com/en/models/1569250-wacom-intuos-pen-and-tablet-stand#profileId-1650145

Updated in https://www.printables.com/model/833761-soporte-lapiz-wacom-intuos-wacom-intuos-pen-holder

Uptaded 17/07/2024

Notes:

The print time has been significantly improved.

Now you only need one support, which is to keep the replacement tips of the Wacom pen from moving.

If you find any problems please, contact with me.

Spanish:

For whom this model is intended:

Wacom pencils of the CTL-4100 series and similar variants, also for pencils having a diameter less than or equal to 12 mm.

*(It might be interesting in case you use different tips to consult these measurements in the drawings I have uploaded.

How to proceed to make the 3D printing:** **

These two pieces could be very difficult to turn.

If this is your case: screw in and out to increase the play between the two pieces.

Due to manufacturing tolerances, it might not work in your case. If so, you could scale the part "Wacom bracket part 2" a few millimeters more.

1.Unload the base "bottom part".

2.Unload the upper part "upper part".

Features:

• Hole to insert the pencil.

• Pencil holder in horizontal position.

• Refill holes for 10 spare tips.

• Precise weight and height for stand stability.

• ISO thread M45 x1.5 (1.5 is the thread pitch) with a tolerance to make a tightening adjustment.

English:

For whom this model is intended:

Wacom pens from the CTL-4100 series and similar variants, also for pens with a diameter equal to or less than 12 mm.

Measurements referenced in the uploaded images. (It might be interesting in case you use different tips to consult these measurements in the blueprints I have uploaded).

How to proceed to 3D print:

These two pieces might be too hard to turn the screw.

If this is your case: screw in and unscrew to increase the play between the two pieces.

Due to manufacturing tolerances, it might not work in your case. If so, you could scale the part "wacom support part 2" up by a few millimeters.

1.Download the base "bottom part".

2.Download the top part "parte superior".

Features:

• Hole to insert the pen.

• Pen holder in horizontal position.

• Holes for spare parts for 10 replacement tips.

• Weight and height specified for stand stability.

• ISO thread M45 x1.5 (1.5 is the thread pitch) with tolerance for adjustment tightening.

Spanish:

*Only the upper part needs support.

Thread does not need support.

Used filament:

-Silver Gray PLA 850 top.

-Bottom: PLA 850 White.

Temperature:

• Nozzle: Depends on your filament

• Bed: 30 Degrees C.

English:

*Only the top part needs support.

The thread does not need support.

Filament used:

• Top part: Silver Gray PLA 850.

• Bottom part: White PLA 850.

Temperature:

• Nozzle: Depends on your filament.

• Bed: 30 degrees Celsius.