CNC mobile dust collector CNC 3018 spindle 52 mm

What a joy to use a CNC 3018 it's a universal tool that can engrave and cut with a laser, engrave and cut all materials, cut vinyl, draw with a pen or with a scratch pad stylus.

The possibilities of this CNC3018 are endless and very interesting for you to create!

change tools yes but !

Here's a solution to the problem of changing tools during machining, using a commercially available nylon brush!

If you're making 3D relief engravings, it's difficult to fit the finishing tool after rough machining; because inserting two wrenches to remove the cutters is impossible for a CNC3018 without moving the X Y Z axes.

I've got the solution!

change tools yes but!

Here is an assembly which addresses the problem of changing tools during machining with the assembly of a commercial nylon brush!

If you are making 3D relief engravings it is difficult to mount the finishing tool after rough machining; because inserting two keys to disassemble the cutters is impossible for a CNC3018 without moving the X Y Z axes.

I have the solution!

I use 0.2mm resolution PLA Filament 204° Bed 55° temperatures

support everywhere of the organic type is a must with PrusaSlicer to get good results . The supports are easy to remove,

Clearances are of the order of 0.2mm for perfect slide fit.