Skip to content
Advertising

Bench Clamp Fishing Line Spooler

clamp_1_orange.jpg Bench Clamp Fishing Line Spooler
clamp_2_orange.jpg Bench Clamp Fishing Line Spooler
rotate_comp.jpg Bench Clamp Fishing Line Spooler
spool_on_orange.jpg Bench Clamp Fishing Line Spooler
spring_compressed.jpg Bench Clamp Fishing Line Spooler
spring_extended.jpg Bench Clamp Fishing Line Spooler
bench_clamp_spooler.jpg Bench Clamp Fishing Line Spooler
top_rotate_spooler.jpg Bench Clamp Fishing Line Spooler
clamp_base.stl Bench Clamp Fishing Line Spooler
clamp_ear_adjust.stl Bench Clamp Fishing Line Spooler
clamp_ear_threaded.stl Bench Clamp Fishing Line Spooler
rod_handle_hex.stl Bench Clamp Fishing Line Spooler
stopper_hex.stl Bench Clamp Fishing Line Spooler
position_rod.stl Bench Clamp Fishing Line Spooler
extension.stl Bench Clamp Fishing Line Spooler
position_block_hex.stl Bench Clamp Fishing Line Spooler
bushing_spool.stl Bench Clamp Fishing Line Spooler
knob_adjuster.stl Bench Clamp Fishing Line Spooler
clamp_1_orange.jpg Bench Clamp Fishing Line Spooler
clamp_2_orange.jpg Bench Clamp Fishing Line Spooler
rotate_comp.jpg Bench Clamp Fishing Line Spooler
spool_on_orange.jpg Bench Clamp Fishing Line Spooler
spring_compressed.jpg Bench Clamp Fishing Line Spooler
spring_extended.jpg Bench Clamp Fishing Line Spooler
bench_clamp_spooler.jpg Bench Clamp Fishing Line Spooler
top_rotate_spooler.jpg Bench Clamp Fishing Line Spooler
clamp_base.stl Bench Clamp Fishing Line Spooler
clamp_ear_adjust.stl Bench Clamp Fishing Line Spooler
clamp_ear_threaded.stl Bench Clamp Fishing Line Spooler
rod_handle_hex.stl Bench Clamp Fishing Line Spooler
stopper_hex.stl Bench Clamp Fishing Line Spooler
position_rod.stl Bench Clamp Fishing Line Spooler
extension.stl Bench Clamp Fishing Line Spooler
position_block_hex.stl Bench Clamp Fishing Line Spooler
bushing_spool.stl Bench Clamp Fishing Line Spooler
knob_adjuster.stl Bench Clamp Fishing Line Spooler
Advertising
Make an offer
Share
Add to
Make
?
Creation quality: 0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
11 files (PDF and STL) Close
  • Spooler_bench_clamp_BOM.pdf
  • bushing_spool.stl
  • clamp_base.stl
  • clamp_ear_adjust.stl
  • clamp_ear_threaded.stl
  • extension.stl
  • knob_adjuster.stl
  • position_block_hex.stl
  • position_rod.stl
  • rod_handle_hex.stl
  • stopper_hex.stl

Learn more about the formats
Publication date
Design number 1970056
Design author V3Precision
V3Precision

V3Precision

Issue with this design? Report a problem.

3D printer file info

3D model description

This Bench Clamp Fishing Line Spooler is a must-have for any angler. It is designed to make spooling your fishing line quick and easy. With an adjustable clamp, it can be attached to any table or work surface (up to 2.5" thick), allowing you to keep your hands free to manage your line. Whether you're a seasoned pro or just starting out, this line spooler is an essential tool for any angler.

This fishing line spooler is light weight and very sturdy with a solid C-Clamp that will fit up to a 2.5" thick bench top or table.
The spooler rod is adjustable to fit your position on the bench. It is spring loaded and can adjust 360 degrees and locks in every 45 degrees. No matter where or which corner of your bench you are working on, you can adjust the rod to point in the direction you want!
- This fishing line spooler is light weight and very sturdy with a solid C-Clamp that will fit up to a 2.5" thick bench top or table.
- The spooler rod is adjustable to fit your position on the bench. It is spring loaded and can adjust 360 degrees and locks in every 45 degrees. No matter where or which corner of your bench you are working on, you can adjust the rod to point in the direction you want!
- The spooler rod is 8 inches long to fit most sizes of fishing line spool.
- The line spool bushings are also spring loaded to keep firm pressure on the fishing spool.
- This Line Spooler was 3D printed using ASA filament.

3D printing settings

This print has about 10 different parts, some with multiple prints. It also needs a threaded rod and two sizes of springs. All is shown in the BOM with links to the springs on Amazon.

As you can see in the pictures, I printed in different colors using ASA on a Bambu Lab X1C printer. These parts can be printed using PLA or PETG if used indoors. Keep in mind that the settings I used id for ASA.

Some parts will need support, but they were designed to use as little support as possible.

Due to over-tightening the C-Clamp assembly (very common) during use, The C-Clamp needs two #6 screws for extra strength. I also used super glue.

Categories

All categories โ€บ Tool

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the siteโ€™s revenues are paid back to the platformโ€™s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.