Skip to content
Advertising

2.85 mm filament splicer

splicer-1.png 2.85 mm filament splicer
splicer-1.png 2.85 mm filament splicer
splicer-iso-light.png 2.85 mm filament splicer
splicer-2.png 2.85 mm filament splicer
filament holder.stl 2.85 mm filament splicer
lower jaw.stl 2.85 mm filament splicer
upper jaw.stl 2.85 mm filament splicer
splicer-1.png 2.85 mm filament splicer
splicer-1.png 2.85 mm filament splicer
splicer-iso-light.png 2.85 mm filament splicer
splicer-2.png 2.85 mm filament splicer
filament holder.stl 2.85 mm filament splicer
lower jaw.stl 2.85 mm filament splicer
upper jaw.stl 2.85 mm filament splicer
Advertising
Make an offer
Share
Add to
Make
?
Creation quality: 0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
6 files (3MF and STL) Close
  • filament holder.3mf
  • filament holder.stl 7.2 × 20.0 × 5.0 mm
  • lower jaw.3mf
  • lower jaw.stl 80.0 × 60.0 × 12.995067 mm
  • upper jaw.3mf
  • upper jaw.stl 65.0 × 25.0 × 5.0 mm

Learn more about the formats
Publication date
Design number 1724864
Design author Docredstone
Docredstone

Docredstone

Issue with this design? Report a problem.

3D printer file info

3D model description

Corrected version:

This is a 2.85mm filament splicer in three parts. It only requires a 2mm screw or a 2.4mm nail to make the axle. It is printable on a resin 3D printer such as the Form 3.

To use it, you will need a hot air station or an equivalent tool. Here are the steps:

  1. Secure both filaments with the side clips while ensuring a small overlap.

  2. Heat the filaments until they melt (hot air at 250°C for PLA).

  3. Press firmly and wait until it cools down.

  4. You're done; now you have a single filament wire.

3D printing settings

Grey V4, adaptive layer height

Page translated by automatic translation. See the original version.

Categories

All categories › Tool › Hand Tools

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.