Skip to content
Advertising

1.25" - 31.8mm Manifold Fabrication Kit

3-Cylinder-Assembly.png 1.25" - 31.8mm Manifold Fabrication Kit
3-Cylinder-Side.png 1.25" - 31.8mm Manifold Fabrication Kit
3-Cylinder.png 1.25" - 31.8mm Manifold Fabrication Kit
4-Cylinder-Assembly-Side.png 1.25" - 31.8mm Manifold Fabrication Kit
4-Cylinder-Assembly.png 1.25" - 31.8mm Manifold Fabrication Kit
Assembly14.png 1.25" - 31.8mm Manifold Fabrication Kit
Bends.png 1.25" - 31.8mm Manifold Fabrication Kit
Expander-assembly-Complete.png 1.25" - 31.8mm Manifold Fabrication Kit
Expander-assembly.png 1.25" - 31.8mm Manifold Fabrication Kit
New-Start-End-Piece.png 1.25" - 31.8mm Manifold Fabrication Kit
Pipe-Cut-Marker-2.png 1.25" - 31.8mm Manifold Fabrication Kit
Pipe-Cut-Marker.png 1.25" - 31.8mm Manifold Fabrication Kit
Pipe-Side.png 1.25" - 31.8mm Manifold Fabrication Kit
Sch10-40-1.25-15-Degree-47.75-CLR-Start.png 1.25" - 31.8mm Manifold Fabrication Kit
SCH14-40-1.25-Inch-3-Cylinder-15-Degree-Merge-Collector.png 1.25" - 31.8mm Manifold Fabrication Kit
SCH14-40-1.25-Inch-6-Cylinder-15-Degree-Merge-Collector.png 1.25" - 31.8mm Manifold Fabrication Kit
SCH14-40-1.25-Inch-8-Cylinder-15-Degree-Merge-Collector.png 1.25" - 31.8mm Manifold Fabrication Kit
1.25-Inch-Center-Line-Marker-3-Port-Pen-Adjustable-14mm.png 1.25" - 31.8mm Manifold Fabrication Kit
1.25-Inch-Center-Line-Marker-Pen-Adjustable-14mm.png 1.25" - 31.8mm Manifold Fabrication Kit
3-Cylinder-Assembly.png 1.25" - 31.8mm Manifold Fabrication Kit
3-Cylinder-Side.png 1.25" - 31.8mm Manifold Fabrication Kit
3-Cylinder.png 1.25" - 31.8mm Manifold Fabrication Kit
4-Cylinder-Assembly-Side.png 1.25" - 31.8mm Manifold Fabrication Kit
4-Cylinder-Assembly.png 1.25" - 31.8mm Manifold Fabrication Kit
Assembly14.png 1.25" - 31.8mm Manifold Fabrication Kit
Bends.png 1.25" - 31.8mm Manifold Fabrication Kit
Expander-assembly-Complete.png 1.25" - 31.8mm Manifold Fabrication Kit
Expander-assembly.png 1.25" - 31.8mm Manifold Fabrication Kit
New-Start-End-Piece.png 1.25" - 31.8mm Manifold Fabrication Kit
Pipe-Cut-Marker-2.png 1.25" - 31.8mm Manifold Fabrication Kit
Pipe-Cut-Marker.png 1.25" - 31.8mm Manifold Fabrication Kit
Pipe-Side.png 1.25" - 31.8mm Manifold Fabrication Kit
Sch10-40-1.25-15-Degree-47.75-CLR-Start.png 1.25" - 31.8mm Manifold Fabrication Kit
SCH14-40-1.25-Inch-3-Cylinder-15-Degree-Merge-Collector.png 1.25" - 31.8mm Manifold Fabrication Kit
SCH14-40-1.25-Inch-6-Cylinder-15-Degree-Merge-Collector.png 1.25" - 31.8mm Manifold Fabrication Kit
SCH14-40-1.25-Inch-8-Cylinder-15-Degree-Merge-Collector.png 1.25" - 31.8mm Manifold Fabrication Kit
1.25-Inch-Center-Line-Marker-3-Port-Pen-Adjustable-14mm.png 1.25" - 31.8mm Manifold Fabrication Kit
1.25-Inch-Center-Line-Marker-Pen-Adjustable-14mm.png 1.25" - 31.8mm Manifold Fabrication Kit
Advertising
Share
Add to
Make
?
Creation quality: 5/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
License
Usages
3D design format
9 files (ZIP) Close
  • 1.25 Inch 31.8 CLR Tear Drop Exit.stl.zip
    • 1.25 Inch 31.8 CLR Tear Drop Exit.stl
  • 1.25 Inch Bends.zip
    • 15 Degree/40mm CLR/1.25 Inch - 15 Degree 40mm CLR End.stl
    • 15 Degree/40mm CLR/1.25 Inch - 15 Degree 40mm CLR Start.stl
    • 15 Degree/40mm CLR/1.25 Inch - 15 Degree 40mm CLR.stl
    • 15 Degree/40mm CLR/1.25 Inch - 30 Degree 40mm CLR End.stl
    • 15 Degree/40mm CLR/1.25 Inch - 30 Degree 40mm CLR Start.stl
    • 15 Degree/40mm CLR/1.25 Inch - 30 Degree 40mm CLR.stl
    • 15 Degree/40mm CLR/1.25 Inch - 45 Degree 40mm CLR End.stl
    • 15 Degree/40mm CLR/1.25 Inch - 45 Degree 40mm CLR Start.stl
    • 15 Degree/40mm CLR/1.25 Inch - 45 Degree 40mm CLR.stl
    • 15 Degree/40mm CLR/1.25 Inch - 60 Degree 40mm CLR End.stl
    • 15 Degree/40mm CLR/1.25 Inch - 60 Degree 40mm CLR Start.stl
    • 15 Degree/40mm CLR/1.25 Inch - 60 Degree 40mm CLR.stl
    • 15 Degree/40mm CLR/1.25 Inch - 75 Degree 40mm CLR End.stl
    • 15 Degree/40mm CLR/1.25 Inch - 75 Degree 40mm CLR Start.stl
    • 15 Degree/40mm CLR/1.25 Inch - 75 Degree 40mm CLR.stl
    • 15 Degree/40mm CLR/1.25 Inch - 90 Degree 40mm CLR End.stl
    • 15 Degree/40mm CLR/1.25 Inch - 90 Degree 40mm CLR Start.stl
    • 15 Degree/40mm CLR/1.25 Inch - 90 Degree 40mm CLR.stl
    • 15 Degree/Long Radius/1.25 Inch - 15 Degree 47.625mm CLR End.stl
    • 15 Degree/Long Radius/1.25 Inch - 15 Degree 47.625mm CLR Start.stl
    • 15 Degree/Long Radius/1.25 Inch - 15 Degree 47.625mm CLR.stl
    • 15 Degree/Long Radius/1.25 Inch - 30 Degree 47.625mm CLR End.stl
    • 15 Degree/Long Radius/1.25 Inch - 30 Degree 47.625mm CLR Start.stl
    • 15 Degree/Long Radius/1.25 Inch - 30 Degree 47.625mm CLR.stl
    • 15 Degree/Long Radius/1.25 Inch - 45 Degree 47.625mm CLR End.stl
    • 15 Degree/Long Radius/1.25 Inch - 45 Degree 47.625mm CLR Start.stl
    • 15 Degree/Long Radius/1.25 Inch - 45 Degree 47.625mm CLR.stl
    • 15 Degree/Long Radius/1.25 Inch - 60 Degree 47.625mm CLR End.stl
    • 15 Degree/Long Radius/1.25 Inch - 60 Degree 47.625mm CLR Start.stl
    • 15 Degree/Long Radius/1.25 Inch - 60 Degree 47.625mm CLR.stl
    • 15 Degree/Long Radius/1.25 Inch - 75 Degree 47.625mm CLR End.stl
    • 15 Degree/Long Radius/1.25 Inch - 75 Degree 47.625mm CLR Start.stl
    • 15 Degree/Long Radius/1.25 Inch - 75 Degree 47.625mm CLR.stl
    • 15 Degree/Long Radius/1.25 Inch - 90 Degree 47.625mm CLR End.stl
    • 15 Degree/Long Radius/1.25 Inch - 90 Degree 47.625mm CLR Start.stl
    • 15 Degree/Long Radius/1.25 Inch - 90 Degree 47.625mm CLR.stl
    • 15 Degree/Short Radius/1.25 Inch - 15 Degree 31.75mm CLR Start.stl
    • 15 Degree/Short Radius/1.25 Inch - 15 Degree 31.75mm CLR.stl
    • 15 Degree/Short Radius/1.25 Inch - 30 Degree 31.75mm CLR End.stl
    • 15 Degree/Short Radius/1.25 Inch - 30 Degree 31.75mm CLR Start.stl
    • 15 Degree/Short Radius/1.25 Inch - 30 Degree 31.75mm CLR.stl
    • 15 Degree/Short Radius/1.25 Inch - 45 Degree 31.75mm CLR End.stl
    • 15 Degree/Short Radius/1.25 Inch - 45 Degree 31.75mm CLR Start.stl
    • 15 Degree/Short Radius/1.25 Inch - 45 Degree 31.75mm CLR.stl
    • 15 Degree/Short Radius/1.25 Inch - 60 Degree 31.75mm CLR End.stl
    • 15 Degree/Short Radius/1.25 Inch - 60 Degree 31.75mm CLR Start.stl
    • 15 Degree/Short Radius/1.25 Inch - 60 Degree 31.75mm CLR.stl
    • 15 Degree/Short Radius/1.25 Inch - 75 Degree 31.75mm CLR End.stl
    • 15 Degree/Short Radius/1.25 Inch - 75 Degree 31.75mm CLR Start.stl
    • 15 Degree/Short Radius/1.25 Inch - 75 Degree 31.75mm CLR.stl
    • 15 Degree/Short Radius/1.25 Inch - 90 Degree 31.75mm CLR End.stl
    • 15 Degree/Short Radius/1.25 Inch - 90 Degree 31.75mm CLR Start.stl
    • 15 Degree/Short Radius/1.25 Inch - 90 Degree 31.75mm CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 18 Degree 40 CLR End.stl
    • 9 Degree/40mm CLR/1.25 Inch - 18 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 18 Degree 40 CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 27 Degree 40 CLR End.stl
    • 9 Degree/40mm CLR/1.25 Inch - 27 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 27 Degree 40 CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 36 Degree 40 CLR End.stl
    • 9 Degree/40mm CLR/1.25 Inch - 36 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 36 Degree 40 CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 54 Degree 40 CLR End.stl
    • 9 Degree/40mm CLR/1.25 Inch - 54 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 54 Degree 40 CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 63 Degree 40 CLR End.stl
    • 9 Degree/40mm CLR/1.25 Inch - 63 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 63 Degree 40 CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 72 Degree 40 CLR End.stl
    • 9 Degree/40mm CLR/1.25 Inch - 72 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 72 Degree 40 CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 81 Degree 40 CLR End.stl
    • 9 Degree/40mm CLR/1.25 Inch - 81 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 81 Degree 40 CLR.stl
    • 9 Degree/40mm CLR/1.25 Inch - 9 Degree 40 CLR Start.stl
    • 9 Degree/40mm CLR/1.25 Inch - 9 Degree 40 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 18 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 18 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 18 Degree 47.625 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 27 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 27 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 27 Degree 47.625 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 36 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 36 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 36 Degree 47.625 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 54 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 54 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 54 Degree 47.625 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 63 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 63 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 63 Degree 47.625 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 72 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 72 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 72 Degree 47.625 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 81 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 81 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 81 Degree 47.625 CLR.stl
    • 9 Degree/Long Radius/1.25 Inch - 9 Degree 47.625 CLR End.stl
    • 9 Degree/Long Radius/1.25 Inch - 9 Degree 47.625 CLR Start.stl
    • 9 Degree/Long Radius/1.25 Inch - 9 Degree 47.625 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 18 Degree 31.75 CLR End.stl
    • 9 Degree/Short Radius/1.25 Inch - 18 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 18 Degree 31.75 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 27 Degree 31.75 CLR End.stl
    • 9 Degree/Short Radius/1.25 Inch - 27 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 27 Degree 31.75 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 36 Degree 31.75 CLR End.stl
    • 9 Degree/Short Radius/1.25 Inch - 36 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 36 Degree 31.75 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 54 Degree 31.75 CLR End.stl
    • 9 Degree/Short Radius/1.25 Inch - 54 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 54 Degree 31.75 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 63 Degree 31.75 CLR End.stl
    • 9 Degree/Short Radius/1.25 Inch - 63 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 63 Degree 31.75 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 72 Degree 31.75 CLR End.stl
    • 9 Degree/Short Radius/1.25 Inch - 72 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 72 Degree 31.75 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 81 Degree 31.75 CLR End.stl
    • 9 Degree/Short Radius/1.25 Inch - 81 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 81 Degree 31.75 CLR.stl
    • 9 Degree/Short Radius/1.25 Inch - 9 Degree 31.75 CLR Start.stl
    • 9 Degree/Short Radius/1.25 Inch - 9 Degree 31.75 CLR.stl
  • 1.25 Inch Centerline Markers.zip
    • 1.25 Inch Center Line Marker - Pen Adjustable 14mm.stl
    • 1.25 Inch Center Line Marker 3 Port - Pen Adjustable 14mm.stl
    • Allen Head 15-15 M4.stl
    • Hex Head 15-15 M4.stl
  • 1.25 Inch Cut Angle Markers.zip
    • 1.25 Inch 31.75mm CLR 5 Degree Cut Marker.stl
    • 1.25 Inch 31.75mm CLR 9 Degree Cut Marker.stl
    • 1.25 Inch 47.625mm CLR 5 Degree Cut Marker.stl
    • 1.25 Inch 47.625mm CLR 9 Degree Cut Marker.stl
  • 1.25 Inch Expander.zip
    • 1.25 Inch Expander.stl
    • 1.25 Inch Main Body.stl
  • 1.25 Inch Flange Adapters.zip
    • 10mm Flange Adapter 10mm Leg.stl
    • 10mm Flange Adapter 15mm Leg.stl
    • 10mm Flange Adapter 20mm Leg.stl
    • 10mm Flange Adapter 25mm Leg.stl
    • 10mm Flange Adapter 30mm Leg.stl
    • 10mm Flange Adapter 35mm Leg.stl
    • 10mm Flange Adapter 40mm Leg.stl
    • 8mm Flange Adapter 10mm Leg.stl
    • 8mm Flange Adapter 15mm Leg.stl
    • 8mm Flange Adapter 20mm Leg.stl
    • 8mm Flange Adapter 25mm Leg.stl
    • 8mm Flange Adapter 30mm Leg.stl
    • 8mm Flange Adapter 35mm Leg.stl
    • 8mm Flange Adapter 40mm Leg.stl
    • Max Size.PNG
    • Min Size.PNG
  • 1.25 Inch Merge Collector Tool.zip
    • 1.25 inch 4 Cylinder Cut Marker 11.5D.stl
    • 1.25 inch 4 Cylinder Cut Marker 15D.stl
    • 1.25 Inch - 3.5 Degree Adapter.stl
    • 1.25 inch 3 Cylinder Cut Marker 11.5D.stl
    • 1.25 inch 3 Cylinder Cut Marker 15D.stl
    • 1.25 inch 5 Cylinder Cut Marker 11.5D.stl
    • 1.25 inch 5 Cylinder Cut Marker 15D.stl
    • 1.25 inch 6 Cylinder Cut Marker 11.5D.stl
    • 1.25 inch 6 Cylinder Cut Marker 15D.stl
    • 1.25 inch 8 Cylinder Cut Marker 11.5D.stl
    • 1.25 inch 8 Cylinder Cut Marker 15D.stl
    • 11.5 Degree Base Block.stl
  • 1.25 Inch Merge Collector.zip
    • 1.25 Inch - 2 Cylinder 11.5 Degree Merge.stl
    • 1.25 Inch - 2 Cylinder 15 Degree Merge.stl
    • 1.25 Inch - 3 Cylinder 11.5 Degree Merge Collector.stl
    • 1.25 Inch - 3 Cylinder 15 Degree Merge Collector.stl
    • 1.25 Inch - 4 Cylinder 11.5 Degree Merge Collector.stl
    • 1.25 Inch - 4 Cylinder 15 Degree Merge Collector.stl
    • 1.25 Inch - 5 Cylinder 11.5 Degree Merge Collector.stl
    • 1.25 Inch - 5 Cylinder 15 Degree Merge Collector.stl
    • 1.25 Inch - 6 Cylinder 11.5 Degree Merge Collector.stl
    • 1.25 Inch - 6 Cylinder 15 Degree Merge Collector.stl
    • 1.25 Inch - 8 Cylinder 11.5 Degree Merge Collector.stl
    • 1.25 Inch - 8 Cylinder 15 Degree Merge Collector.stl
  • 1.25 Inch Straight.zip
    • 1.25 Inch - 100mm Straight.stl
    • 1.25 Inch - 105mm Straight.stl
    • 1.25 Inch - 110mm Straight.stl
    • 1.25 Inch - 20mm Straight Start.stl
    • 1.25 Inch - 20mm Straight.stl
    • 1.25 Inch - 25mm Straight.stl
    • 1.25 Inch - 30mm Straight Start.stl
    • 1.25 Inch - 30mm Straight.stl
    • 1.25 Inch - 35mm Straight.stl
    • 1.25 Inch - 40mm Straight Start.stl
    • 1.25 Inch - 40mm Straight.stl
    • 1.25 Inch - 45mm Straight.stl
    • 1.25 Inch - 50mm Straight Start.stl
    • 1.25 Inch - 50mm Straight.stl
    • 1.25 Inch - 55mm Straight.stl
    • 1.25 Inch - 60mm Straight.stl
    • 1.25 Inch - 65mm Straight.stl
    • 1.25 Inch - 70mm Straight.stl
    • 1.25 Inch - 75mm Straight.stl
    • 1.25 Inch - 80mm Straight.stl
    • 1.25 Inch - 85mm Straight.stl
    • 1.25 Inch - 90mm Straight.stl
    • 1.25 Inch - 95mm Straight.stl

Learn more about the formats
Last update
Publication date
Design number 3648488
RkDesigns

RkDesigns

Issue with this design? Report a problem.

3D printer file info

3D model description

This fabrication Kit Includes Everything you will need to fabricate a mock up tubular exhaust manifold for 2, 3, 4, 5, 6 and 8 cylinder exhaust manifolds in 1.25" - 31.75mm tubing with any wall thickness, and if there isn't a piece in there to your exact requirements drop me a message and I’ll add it as soon as I can.

This kit includes models with “start” and "end" in the file name, these have an 8mm hole which can bolt to a manifold flange Every bend has a start piece and currently a selection of straight pieces, with the clips then ready to start your fabrication, then there are a range of angles in 9 and 15-degree increments, with two different center line radius’. Each is also marked in increments of 15 degrees so you can accurately note the angles at which two pipes sit when translating your design into metal.

The kit contains an expander that will fit into an existing 1.25 Inch tubing with a maximum of 1.5mm wall thickness, a start piece then attaches to this to allow you to carry on from existing pipe work, or start a new downpipe from scratch. The expander works by using the bolt that the start piece attaches with to compress and expand inside the tube, it also pulls the start piece in to make sure that it doesn’t move while mocking up. Larger systems will need added supports.

This listing includes the following files:

1.25" - 31.75mm/1.25 CLR bends (Start + end piece for all)
9 degree
15 degree
18 degree
27 degree
30degree
36 degree
45 degree
54 degree
60 degree
72 degree
75 degree
81 degree
90 degree

1.5 x D - 47.625mm 1.875 Inch CLR bends (Start + end piece for all)
9 degree
15 degree
18 degree
27 degree
30degree
36 degree
45 degree
54 degree
60 degree
72 degree
75 degree
81 degree
90 degree

1.25" - 40mm 1.575 Inch CLR bends (Start + end piece for all)
9 degree
15 degree
18 degree
27 degree
30degree
36 degree
45 degree
54 degree
60 degree
72 degree
75 degree
81 degree
90 degree

1.25 Inch Straight
20mm (Plus Start Piece)
25mm
30mm (Plus Start Piece)
35mm
40mm (Plus Start Piece)
45mm
50mm (Plus Start Piece)
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
95mm
100mm
105mm
110mm

1.25 Inch - Merge collectors
2-cylinder 11.5 degree
2-cylinder 15 degree
3-cylinder 11.5 degree
3-cylinder 15 degree
4-cylinder 11.5 degree
4-cylinder 15 degree
5-cylinder 11.5 degree
5-cylinder 15 degree
6-cylinder 11.5 degree
6-cylinder 15 degree
8-cylinder 11.5 degree
8-cylinder 15 degree

1.25 Inch Expander

Flange Adapters
These are universal pieces that will adapt to act as a flange in 8 or 10mm thickness and any bolt pattern. They come with varying leg lengths in increments of 5mm. A start piece can then be attached using the M8 Bolt, with the nut on the inside which is captivated so adjustments can be made without removing the adapter.
8mm stud diameter available
10mm Stud diameter available

Tubing bend cut guide(See my other listing for information on these)
https://cults3d.com/:2168038

Centerline markers (See my other listing for information on these)
1.25 Inch
https://cults3d.com/en/3d-model/tool/centerline-tools-1-to-3

1.25 Inch Merge Collector Cutting Jig as well as all the different cylinder count cut guides
https://cults3d.com/:2480137

If you want a different pipe size, specific angle or an exhaust flange kit, drop me a message and I will get back to you as soon as possible.

3D printing settings

See guide availble for free:

https://cults3d.com/:2567742

This includes a small description on all files available, it also had a section on printing all of the pieces avalble.

Categories

All categories › Tools › Hand tools / DIY / Machine tools

Meta tags

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.