Upright dustpan - Ultra resistant 3d dustpan

🧹 Dustpan with 3D stick - More resistant and adaptable

Tired of your dustpan always breaking at the worst moment? 🚨 Print it at home and forget about the problem!

🔸 Available in two sizes:
✔️ Standard size (suitable for any printer): 20 x 20 cm (7.87 x 7.87 inches).
✔️ Reduced version for other uses.

🛠️ Much more resistant than commercial models, which often break with use. Reinforced design ensures greater durability, saving you from having to buy a new one every few years.

✨ Premium details:
✔️ Curb at the entrance to prevent dirt from coming back out.
✔️ Serrated surfaces on the top to scrape the broom for easy cleaning.

🔄 Compatible with standard commercial dustpan, so if the dustpan breaks but the stick is still in good condition... Take advantage of it! Simply print your new dustpan and keep using it without overspending.

🛠️ Prefer to print the stick too? It consists of three pieces joined by threads. If you also fix them with adhesive, you get extra strength similar to commercial products.

🔹 Strong, practical and always ready when you need it. 💯 Print it and enjoy a long-lasting solution! 🎨🛠️ 🛠️

🎁 A perfect gift for your broom... 🧹✨

🛠️ Printing instructions 🖨️

📂 All models are in STL and do not require supports.

🧹 Pickup

✅ Recommended material: PETG for strength and durability, although it can also be printed in PLA without problem.
✅ Printing configuration:
- Nozzle: 0.4 mm
- Layer height: 0.32 mm
- Walls: 3 lines
- Filling: 30%

📏 Stick (4 pieces: 3 sections + 1 top cap)

✅ Recommended material: PETG for better strength.
✅ Printing configuration:
- Layer height: 0.32 mm
- Walls: 3 lines
- Filling: 60%
- IMPORTANT: Add a good support at the base to avoid peeling off when printing in height.

🔩 Assembly

🔹 The 4 pieces of the stick are screwed together (without forcing).
🔹 For greater firmness and durability, it is recommended to apply adhesive glue on the threaded joints.

⚠️ Note: The picker is much stronger than commercial models. However, since the pole is assembled in several pieces, it will not have the same flexibility as a commercial pole. Therefore, it is recommended to reinforce the joints with glue for better stability.

I hope you enjoy your new product and for any questions or clarification do not hesitate to contact us and we will try to solve it as soon as possible.
@Martym3d