If like me you're tired of digging in your cupboards to find a spice.
This organizer allows you to store your 6 most used spices to have them at hand.
It can be fixed under a high cabinet or in a closet.
Printable in 8 parts:
1) A "Fixed part" to screw in the furniture (Only 2 screws length 30mm maxi)
2) A "mobile part"
3) Six "rings"
Assembled dimensions (without spice):
200mm long x 78mm wide x80mm high.
1) To attach the rings on the moving part you will need to get a tube of strong glue paying attention to the direction of the rings.
Rings at the bottom and movable part with the 2 axes of the center at the top (See photo).
2) For fastening to the furniture pay attention to the position. See photos
Operation: See GIF
Feel free to suggest me improvements.
Thank you for leaving your comments.
Printed with an A8 anet
I put the same print settings for all three pieces:
Layer height> 0.2mm
Print speed> 75mm / s
Movement speed> 120 mm / s
Density of filling> 30%
Extrusion temperature> 200 °
Tray temperature> 60 °
Attention: for the moving part which is the most imposing piece, I advise you a border of 8mm wide so as not to have a wraping.
Tip: I use a glass plate (picture frame) and hairspray 😉
Fixed part> 42min
Mobile part> 2h08mim
Rings> 18min per piece (108min for 6)
The quality is average with these parameters. Free to modify them
Page translated by automatic translation. Suggest a better translation
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!