Storage with drawers

Here's a pretty storage box with drawers

It's easy to assemble and can be printed without brackets!

Each piece is separated to print in the color of your choice, and vary the tones.

The file contains all the elements needed to assemble the parts:

-Floor - 1

-Drawer contour - 2

-Drawer - 3

-Drawer ceiling - 4

-The ceiling of the box -5

-> The parts are already registered so they can be printed directly in place, in the right orientation so you don't have to place any brackets -<

The advantage is that you can fit as many drawers as you like 1, 2, 3, 10 or more!

Assembly: After printing each part

-Clip the drawer contour onto the floor part

-Clip drawer top to drawer contour part

And so on until you want to finish the drawer box, placing the ceiling last at the very top :)

Of course, don't forget the drawers ;)

Tip: For even more style, print the top part (the ceiling of the box) on a textured bed ;)

The dowels (integrated into the pieces) have been designed to make assembly easy!

Enjoy the print and thank you for your support!

Open to feedback, and your makes :) thanks

Supports : disabled

Filling: 10% of capacity

Nozzle: 0.4 mm

Layer height: 0.2, 0.16 mm, ...

Minimum retraction stroke: very small (so that there is no angel hair, filaments, between the small parts of the ankles that are very close together)