IMOLA — Formula 1 Circuit Model

Official name: Autodromo Internazionale Enzo e Dino Ferrari
Location: Imola, Italy 🇮🇹

The classic Imola circuit, long-time host of the San Marino and Emilia-Romagna Grands Prix.

The Model

A clean, minimalist display of the IMOLA layout: the circuit's outline as a crisp raised track on a slim stand, finished with a Formula 1–style IMOLA nameplate.

• Track outline: 148 × 84 mm, 5 mm thick
• Nameplate: 50 mm wide, 3 mm thick
• Stand (base): 170 × 42 mm
• The two support pins are custom-sized to this circuit, so every track in the collection stands at the same even height regardless of its shape — a consistent look across the whole set.

Files Included

Printing

• No support material required. Every part is pre-oriented to print flat, and the nameplate's accent connectors sit on the bed-side face so they print cleanly — no supports anywhere.
• Recommended settings: 0.2 mm layer height, 0.4 mm nozzle, 2–3 perimeters. The track is a fine 5 mm outline, so a slow first layer helps bed adhesion.
• Print each part on its own, or drop in Autodromo Internazionale Enzo e Dino Ferrari - print.stl to print the whole set in a single job (fits within ~170 mm).
• Looks great as a single-color print, or use a second filament for the nameplate for a two-tone finish.

Assembly

• Push the two pins into the sockets on the underside of the track, then seat the pins into the stand.
• Friction fit — no glue. The pins grip firmly, holding the track secure and stable on its stand, while staying easy to assemble and take apart.