Dragon Headphone Holder/Sculpture

For access to all of my models, including commercial licensing, please check out my Patreon! https://patreon.com/CraftyKid3D

This is the Dragon Headphone Holder and Sculpture. Printing in two easy pieces that snap together, there is no need for glue. Only the head needs minor support to increase the success of the horns printing. I have also included a wall attachment piece that allows you to attach the head flush to the wall if you don't want to print the neck. If you print this model, feel free to tag me on social media and I will be sure to repost it to my followers.

UPDATED 3/9/24- Hi all! I got a comment that the head wasn't perfectly fitting to the neck. I looked over the file and made some adjustments. In case you had the same issue, please redownload these updated files. I apologize for the inconvenience.
ALSO- I added a screw hole to the wall connector in case you do not like command strips.

Cheers, and Happy Printing!
-Christian, @CraftyKid3D

Suggested settings for 0.4 nozzle-
-At least 2 walls
-3 line brim for head to support the horns bed adhesion
-Tree Supports on the head, 50 degree threshold so teh horns have more support
-No supports needed for the neck