Offset water filling mini dishwasher

Hello,

Here's an offset hose for filling my Mini Amazonia (Klarstein) dishwasher with water, but it's identical to the Moulinex Studio MINID2SL.

Having a cupboard above my kitchenette, I couldn't push the dishwasher against the back wall = loss of space.

So I created this offset compatible with the funnel sold with the device for a front filling.

Be careful, clean well the dome supports before fitting the hose, I did not clean well and I had a small crack that appeared, without gravity I do not need to replace, everything remains tight.

**Edition V2.0**

After my first version I noticed various problems with the editing and printing. That's why I made the following improvements:

• Improved general visual rendering with softer, rounded shapes (Flowing on the edges and junctions of the different elements).

• Thickness of the dome revised upwards for a better solidity (first version easily breakable).

• Enlarged dome offset width for easy sealing with the dishwasher.

• Pipe/Dome and Pipe/Revised Elbow connections for easier and less brittle assembly.

• Removal of the end of the pipe coming out inside the dome for a cleaner look and easier printing with less media.

• Creation of a cap to protect the hose inlet when the dishwasher is not being filled.

Feel free to post your creation and/or your improvements =)

Print CR10S PRO V2.

Have a good print!