Ikea Cactus Pot
- 433 views
- 0 likes
- 22 downloads
3D model description
Basic Cactus Pot
I made a basic pot adapted to perfectly fit a mini cactus, like the ones from IKEA (5.5 cm / 2.16 inches top diameter) You can simply buy it and use the brown plastic pot that comes with it to put them in this piece.
I made this design because there aren't a lot of options when it comes to buying pots for these exact dimensions.
The design needs supports for the top part but they're thin and easy to remove.
I uploaded the STL, OBJ, BLEND and 3mf files.
Let me know if you need anything else.
I hope you like it!
Consider rating the model if you've printed it
3D printing settings
I used a Ultimaker2+ with Cura slicer
Dimensions: 62.6mm x 62.6mm x 56mm
Time: 1h 46min
Weight/Filament length: 26g / 3.33m
Layer Height: 0.2mm
Wall/Top/Bottom Thickness: 0.8
Infill Density: 5%
Print Speed: 80%
Travel Speed: 150%
Supports: Yes (The top part has an overhang over 45º)
- 3D file format: ZIP
- Last update: 2021/02/20 at 16:28
- Publication date: 2021/01/23 at 15:08
"Life is what happens while you wait for the 3D printer to finish printing"
Learning a bit more about modeling with each new design I make
You can contact me if you want me to design a print-ready model for you
Best sellers of the category Home
Add a comment
Would you like to support Cults?
You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:
ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.
DONATE: If you want, you can make a donation via PayPal here.
WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!