Universal Shower Curtain Ring

*A universal ring that fits any commercially available shower curtain *.

No need to buy a new set of rings when you need to replace just one, just print your own and save.

Print preferably in PETG for better resilience, but all materials are compatible.

**No print media required.

Feel free to share your make :)

*Universal ring for shower curtain *

**No waste of money; Print just the ring you need to replace.

Print in PETG for more resilience, but any material are compatible.

**No printing supports needed.

Feel free to share your make :)

*This document constitutes a formal notification prohibiting the sale of the specified 3D object in dematerialized and physical form. The use, reproduction and distribution of this object is strictly for personal use only and must not be used for any commercial purpose.

By downloading this 3D object, the recipient acknowledges and accepts the following conditions:

1 Personal use: This 3D object is for personal use only. Any use for commercial purposes, including sale in dematerialized or physical form, is strictly forbidden.

2 Intellectual Property Rights: The author retains all intellectual property rights to this 3D object. No license or assignment of rights is granted unless otherwise specified in writing by the author.

3 Author's liability: The author cannot be held liable for any consequences arising from the unauthorized use, reproduction or distribution of this 3D object.

4 *Violation of Conditions: In the event of violation of these conditions, the author reserves the right to take appropriate legal action to protect its intellectual property rights.

By accepting this 3D object, the recipient confirms that he/she has read, understood and accepted the terms of this non-commercialization clause.

This document constitutes a formal notice prohibiting the sale of the specified 3D object in both digital and physical forms. The use, reproduction, and distribution of this object are strictly reserved for personal purposes and must not, under any circumstances, be intended for commercial activities.

By downloading this 3D object, the recipient acknowledges and agrees to the following conditions:

1 Personal Use: This 3D object is intended exclusively for personal use. Any use for commercial purposes, including sale in digital or physical form, is strictly prohibited.

2 *Intellectual Property Rights: The author retains all intellectual property rights to this 3D object. No license or transfer of rights is granted unless otherwise stated in writing by the author.

3 Author's Liability: The author cannot be held responsible for the consequences arising from unauthorized use, reproduction, or distribution of this 3D object.

4 - Violation of Conditions: In the event of a violation of these conditions, the author reserves the right to take appropriate legal measures to protect their intellectual property rights.

By accepting this 3D object, the recipient confirms having read, understood, and agreed to the terms of this non-commercialization clause.

Quality:

-Nozzle: 0.4mm

-Layer Height: 0.2mm

-Line width: 0.48mm

Material:

-Material: PETG (PLA, ABS, etc)

-Nozzle Temp: 235 °C

-Bed Temp: 70 °C

-Walls: 2-3

-Infill (Filling): 20%-100%

Time to print:

100mm/s = 11min (20% Infill) - 15min (100% Infill)

To be printed flat without supports.

Print flat with no supports.

Printing parameters given for PETG, to be adjusted according to the material used.

Technical data for PETG, you may adjust it if printing with other materials.