War Hammer 4TK - Titan Wound and Void Shield Tracker

Command your War hammer 40000 titan more efficiently with the 'Titan Tracker'.

Video: https://youtu.be/m96Bdn9CfQU

This will track wounds and void shield usage for any 4TK titan up to and including the Warlord.

Up to 120 wounds tracked by the dials at the top, and up to 8 void shields, and current void shield status.

The war engine section in the middle is surrounded by slots for reserve and expended void shields. Reserve shields above and expended shields below. The slot in the centre has a dial attached that allows you to track how damaged the current void shield is. (1-3 and broken!).

Dials include slots for magnets 6x1mm.

STL files included:

-Base
-Wound Dial Top
-Wound Dial Bottom
-War Engine Void Status Tracker
-Void Shield Dial Bottom
-Void Shield Dial Top
-Void Shield

-Base_supported
-War Engine Void Status Tracker_supported
-Void Shield_supported

Printed on an Anycubic Mono SE:

Chitchubox settings:

Layer Height:0.05
Bottom Layer Count: 6
Exposure Time: 1.9
Bottom Exposure Time: 40
Light-off Delay:0.5
Bottom Light-off Delay: 0.5
Bottom Lift Distance: 8
Lifting Distance: 8
Bottom Lift Speed: 180 mm/min
Lifting Speed: 180 mm/min
Retract Speed: 240 mm/min

Resin: Anycubic plant based
About 10 hours base and 2 hours for extras.

Would be much quicker printed flat if you have a big enough build plate.