Skip to content
Advertising

Mecha warrior 01

Advertising
Share
Add to
Make
?
Creation quality: 0/5 (0 votes)
Evaluation of members on the printability, utility, level of detail, etc.
License
3D design format
17 files (STL and ZIP) Close
  • Acces.zip
    • Frag/Part1.stl
    • Frag/Part2.stl
    • Frag/Part3.stl
    • Frag/Part4.stl
    • Frag/Part5.stl
    • Frag/Part6 02.stl
    • Frag/Part7.stl
    • Hips Hold 01.stl
    • Mask spikes 01.stl
    • Pistol/Barrel.stl
    • Pistol/Body 01.stl
    • Pistol/Hammer 01.stl
    • Pistol/Handle part 01.stl
    • Pistol/Hold 01.stl
    • Pistol/Light 01.stl
    • Pistol/Light cover 01.stl
    • Pistol/Part2.stl
    • Pistol/Side decor 01.stl
    • Pistol/Side L 01.stl
    • Pistol/Side R 01.stl
    • Pistol/Spring part 01.stl
    • Pistol/Top 01.stl
    • Pistol/Trigger cover 01.stl
    • Pistol/Trigger.stl
    • Spikes.stl
    • Stand/Assembly1.stl
    • Stand/Connection plate 01.stl
    • Stand/Connection plate 02.stl
    • Stand/Connection plate 03.stl
    • Stand/Feet part 01.stl
    • Stand/Feet part 02.stl
    • Stand/Feet plate 01.stl
    • Stand/Feet plate 02.stl
    • Stand/Long pillar 02.stl
    • Stand/Main pillar 01.stl
    • Stand/Right angle connection 01.stl
    • Stand/Straith connection 01.stl
    • Sword/Blade connection.stl
    • Sword/Blade front part 01 v 01.stl
    • Sword/Blade front part 02 v 01.stl
    • Sword/Blade inner part 01 v 01.stl
    • Sword/Blade inner part 02 v 01.stl
    • Sword/Blade side right p01.stl
    • Sword/Blade side right p02.stl
    • Sword/Blade side right p03.stl
    • Sword/Handle cover 01.stl
    • Sword/Hold 01.stl
    • Sword/Main handle 01.stl
    • Sword/Rimg 01.stl
    • Sword/Spacer 01.stl
    • Top torso spikes 01.stl
  • Arm.zip
    • Arm torso piston connection 01.stl
    • Arm torso piston extension 01.stl
    • Arm torso piston spacer 01.stl
    • Ball joint small 02.stl
    • Elbow cover 01.stl
    • Finger PIN.stl
    • Fingers v 04.stl
    • Link 01.stl
    • Link 02.stl
    • Lover arm 03 supp.stl
    • Lover arm 03.stl
    • Lover arm cover 01.stl
    • Palm connector 02.stl
    • Palm with support.stl
    • Palm.stl
    • Side piston extension 01.stl
    • Side piston holder 01 01.stl
    • Side piston holder 01.stl
    • Side piston holder 02.stl
    • Side piston spacer 01.stl
    • Small Ball join end 01.stl
    • Thumb part 01 v 02.stl
    • Thumb part 02 v 02.stl
    • Thumb part 03 v 02.stl
    • Thumb Spacer.stl
    • Top ball joint end 01.stl
    • Upper arm 02.stl
    • Upper arm light cover 01.stl
  • Ball Joint 01.stl 29.923039 Γ— 29.961494 Γ— 65.0 mm
  • Foot.zip
    • Back Piston Holder.stl
    • Ball Joint End 02.stl
    • Right/Back Piston Holder.stl
    • Right/Ball Joint 01.stl
    • Right/Ball Joint End 02.stl
    • Right/Bottom 02.stl
    • Right/Front Piston Holder 03.stl
    • Right/Front Bumper with Supp.stl
    • Right/Front Bumper.stl
    • Right/Front Light cover.stl
    • Right/Left Base 02.stl
    • Right/Left Light 03.stl
    • Right/Left Outside Armor Spikes 02.stl
    • Right/M4 Screw Cover.stl
    • Right/Piston Bottom.stl
    • Right/Piston Hold 02.stl
    • Right/Piston Hold 05.stl
    • Right/Piston Hold Spacer 02.stl
    • Right/Screw Hold 01.stl
    • Right/Spikes 05.stl
    • Right/Spikes.stl
    • Right/Weight Cover.stl
  • Head.zip
    • Back bottom door 02.stl
    • Back bottom head.stl
    • Ball joint top part 02.stl
    • Base 01.stl
    • Chair part 01 01.stl
    • Chair part 02 01.stl
    • Chair slide 01.stl
    • Chair slide base 01.stl
    • Control panel 01.stl
    • Control panel mouth 01.stl
    • Eye shades 01.stl
    • Front bottom head 01.stl
    • Front head exhaust 01 part 01.stl
    • Front head exhaust 01 part 02.stl
    • Front head exhaust 01 part 03.stl
    • Front head exhaust 01 part 04.stl
    • Front head exhaust 01 with supp 02.stl
    • Front head exhaust 01.stl
    • Front head exhaust end 01.stl
    • Front head exhaust end 02.stl
    • Head cable hold 01.stl
    • Head cable hold 02.stl
    • Head door 01.stl
    • Head doors frame 01.stl
    • Head platform 01.stl
    • Head top 01.stl
    • Head top 02.stl
    • Head top 03.stl
    • Mask vent part 01.stl
    • Mask vent part 02.stl
    • Mask vent part 03.stl
    • Mask vent part 04.stl
    • Mask vent part 05.stl
    • Neck piston connection 02.stl
    • Neck piston connection 03.stl
    • Neck piston connection 04.stl
    • Neck piston connection.stl
    • PCB 01.stl
    • Rotot part 01.stl
    • Rotot part 02 v03.stl
    • Side bottom head L 01.stl
    • Side bottom head R 01.stl
    • Spacer 01.stl
    • Top spikes 01.stl
    • Torso piston connection 01.stl
    • Windows hold 01.stl
  • Hips.zip
    • As shield 02.stl
    • Back 01.stl
    • Back doors 01.stl
    • Back doors 02.stl
    • Base for eloctronic.stl
    • Battery part b.stl
    • Battery part charger top.stl
    • Battery part charger.stl
    • Bottom pistons hold 03.stl
    • Bottom slides.stl
    • Bottom.stl
    • Cable hld.stl
    • Cable shield hold 01.stl
    • Corner 01.stl
    • Corner 02.stl
    • Corner acces 01.stl
    • Corner acces 02.stl
    • Cover 01.stl
    • Cover 02.stl
    • Front 01.stl
    • Front 02.stl
    • Middle 01.stl
    • Middle Joint 01.stl
    • Middle piece 01.stl
    • Middle rotor p 01.stl
    • Middle rotor p 02.stl
    • PCB hold 01.obj
    • PCB hold 02.obj
    • Pillar 01.stl
    • Piston shield p 01 01.stl
    • Piston shield p 02 01.stl
    • Right 01.stl
    • Right side trans 01.stl
    • Rottor.stl
    • Switches and connectors back.stl
    • Switches and connectors.stl
    • Top for eloctronic 01.stl
    • Top for eloctronic 02.stl
  • Lower Leg.zip
    • Back Piston Shield 05.stl
    • Back Shlield slide 03.stl
    • End slider.stl
    • Front Piston Shield 01.stl
    • Lower Leg Base.stl
    • M4 screw cover 01.stl
    • Right/Back Piston Shield 05.stl
    • Right/Back Shlield slide 03.stl
    • Right/Bottom shield 03 p 2.stl
    • Right/End slider.stl
    • Right/Front Piston Shield 01.stl
    • Right/Lower Leg Base.stl
    • Right/M4 screw cover 01.stl
    • Right/Piston Bottom L 01.stl
    • Right/Piston Hold 02.stl
    • Shield shield slide.stl
  • Piston Hold 02.stl 18.0 Γ— 10.0 Γ— 16.0 mm
  • Piston Hold Spacer 01.stl 9.0 Γ— 8.974834 Γ— 3.5 mm
  • Piston Hold Spacer 02.stl 8.901664 Γ— 8.950696 Γ— 4.5 mm
  • Piston Top 01.stl 46.5 Γ— 10.0 Γ— 9.0 mm
  • Piston Top 05.stl 47.25 Γ— 10.0 Γ— 8.0 mm
  • Piston Top 06.stl 47.013556 Γ— 6.0 Γ— 8.0 mm
  • Piston Top Short 01.stl 35.25 Γ— 10.0 Γ— 8.0 mm
  • Piston Top Short 02.stl 35.25 Γ— 8.0 Γ— 8.0 mm
  • Torso.zip
    • Arm door 01.stl
    • Arm piston holder 03.stl
    • Belly Bottom 01.stl
    • Belly Bottom Connect 01.stl
    • Belly Bottom Connect 02.stl
    • Belly Bottom connector.stl
    • Belly Bottom cover 01.stl
    • Belly Bottom cover connect 01.stl
    • Belly Bottom.stl
    • Belly Sliding door 01.stl
    • Cable cage 01.stl
    • Cable cage 02 01.stl
    • Cable cage 02 02.stl
    • Cable cage 02.stl
    • Cable cage 03.stl
    • Cable cover side front 01.stl
    • Cable cover side inner 01.stl
    • Cable cover side side 01.stl
    • Cable cover side side aces 01.stl
    • Cable cover side side aces 02.stl
    • Cable cover side side aces 03.stl
    • Cable cover side side aces 04.stl
    • Cable cover side side cage 01.stl
    • Cable cover top connection 01.stl
    • Door chasis Connector 01.stl
    • Door chasis Connector 02.stl
    • Door top slide 02.stl
    • Door top slide.stl
    • Entrance door 01.stl
    • Entrance door slide 01.stl
    • Front cage acces 01.stl
    • Front cage.stl
    • Front chest grill 01.stl
    • Head Connection 01.stl
    • Head Connection 02.stl
    • Inner grid 01.stl
    • Inner ledder 01 01.stl
    • Inner ledder 01 02.stl
    • Inner ledder 01 03.stl
    • Inner ledder 01 04.stl
    • Inner ledder 01 05.stl
    • Inner ledder 01 06.stl
    • Inner ledder 01.stl
    • Inner tank 01.stl
    • Inner tank 02.stl
    • Inner tank connection 01.stl
    • Inner tank holder bottom 01.stl
    • Inner tank holder top 01.stl
    • LED switch cable hold 01.stl
    • LED switch door 01.stl
    • LED switch door base 01.stl
    • LED switch hold 01.stl
    • Left torso 01.stl
    • Left torso bumper 01.stl
    • Left torso bumper connect 01.stl
    • Left torso side fan blade 01.stl
    • Left torso side fan hold 01.stl
    • Left torso side fan stop 01.stl
    • Left torso side grill 01.stl
    • Left torso top 01.stl
    • Left torso top cover 01.stl
    • Righ arm exten 01.stl
    • Right torso 01.stl
    • Right torso top 01 v 01.stl
    • Right torso top 01.stl
    • Right torso top cover 01.stl
    • Sliding Door top.stl
    • Sliding Doors 02.stl
    • Sliding Doors 03.stl
    • Sliding Doors.stl
    • Top middle torso cover 01.stl
    • Top torso connection 01.stl
    • Torso corner connection 01.stl
    • Torso stairs 01.stl
    • Torso stairs 02.stl
  • Upper Leg.zip
    • Ball Joint End 03.stl
    • Ball Joint End 04.stl
    • Ball joint spacer.stl
    • Bottom piston slide.stl
    • Bottom shield 02 p 1 v 2.stl
    • Bottom shield 03 p 2.stl
    • Bottom shield slide.stl
    • Cable cover 01.stl
    • Cover 01.stl
    • Cover dec 01.stl
    • Cover dec 02.stl
    • Inner LED Tray 01.stl
    • Inner part 01.stl
    • Inner part 02.stl
    • Inner part 03.stl
    • Inner part 04.stl
    • Inner part 05 v 2.stl
    • Inner part 05.stl
    • Inner part 06.stl
    • Inner part 07.stl
    • Inner part 08.stl
    • Inner part 09.stl
    • Inner part 11.stl
    • Inner part 12 v 2.stl
    • Inner part 12.stl
    • Inner part 13.stl
    • Inner part 14.stl
    • Inner part 15.stl
    • Inner part 16.stl
    • Inner part 17.stl
    • Inner part door 01.stl
    • Inner part door 02.stl
    • Inner part door 03.stl
    • Inner part door magnet 01.stl
    • Inner part v 2 p 01.stl
    • Inner part v 2 p 02.stl
    • Inner part v 2 p 03.stl
    • Inner part v 2 p 04.stl
    • Knee shield cover 01.stl
    • Knee shield cover 02.stl
    • Knee shield hold.stl
    • Knee shield p 05.stl
    • Knee shield p 06.stl
    • Knee shield.stl
    • Knees spikes 01.stl
    • M3 Nuts cover 01.stl
    • M3 Screw cover 01.stl
    • M4 screw cover 01.stl
    • Piston Hold 02.stl
    • Upper Leg Base 02 with supp.stl
    • Upper Leg Base 02.stl
    • Upper Leg Base 03 with supp.stl
    • Upper Leg Base 03.stl
    • Upper pistons base 07.stl
    • Upper pistons base.stl

Learn more about the formats
Publication date
Design number 669293
Design author SmileyFace28
SmileyFace28

SmileyFace28

Certified account
Issue with this design? Report a problem.

3D printer file info

3D model description

https://youtu.be/S4tHOhp1JNs
It is not perfect but it is my first try to make something big as this. I am aware of my mistakes, I will avoid them next time. I will do the build guide if there will be some demand.
Left/Right side you need to mirror the part in slicer.

3D printing settings

depends on part

Categories

All categories β€Ί Game

Tags

Advertising

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.