BUNDLE THE DIVISION 2 VOL 1 - EAGLE BEARER & CHAMELEON, EXOTIC ASSAULT RIFLES + STICKY BOMB

CHAMELEON:

In very few pieces supports are used, but they are not fully oriented, it is recommended to leave the scale in which the model comes, in the photos I used an old mobile to simulate the screen and a super simple application that I developed to show a faithful interface to the game, but that is not included in the model.

It has no moving parts, everything is static,

I recommend using a wooden or metal rod that goes through the body to the stock.

In very few parts supports are used, but they are not quite oriented, it is recommended to leave the scale in which the model comes, in the photos I used an old cell phone to simulate the screen and a super simple application I developed to show an interface faithful to the game, but that is not included in the model.

It has no moving parts, everything is static,

I recommend using a wooden or metal rod that goes through the body into the stock.

EAGLE BEARER:

ENGLISH:

Real scale

Completely modular

Possibility to be made Airsoft

Real tolerances

Folding sights

Removable magazine

Folding stock (with screw)

Functional charging handle

Simulated bolt (with movement)

Fire selector with movement

Trigger pull

You will need a couple of springs and screws, mainly M3.

In case you are not interested in any of the features of the model and just want it fixed, you can simply glue all the pieces together.

THE EAGLE:

The eagle is included in flat format for easy printing, by heat you can make the folds you need, you can with heat gun but in case you don't have it, hot water will be all you will need.

This file is printed twice in mirror mode.

ENGLISH:

• Actual scale

• Fully modular

• Possibility to become Airsoft

• Real tolerances

• Folding sights

• Removable magazine

• Deployable stock (with screw)

• Functional charging handle

• Simulated bolt (with movement)

• Fire selector with movement

• Push trigger

You will need a couple of springs and screws, mainly M3.

In case you are not interested in any of the features of the model and just want it fixed, you can simply glue all the parts together.

THE EAGLE:

The eagle is included in flat format for easy printing, by heat you can make the folds you need, you can with heat gun but in case you don't have it, hot water will be all you will need.

This file is printed twice in mirror mode.

REFILL: 15%.

PLA / PETG

30-60 mm/s

supports only on very few parts, 75°, everywhere and tree type

FILL: 15% FILL: 15% FILL: 15% FILL: 15% FILL: 15% FILL: 15% FILL: 15%

PLA / PETG

30-60 mm/s

supports only in very few pieces, 75°, all around and tree type