Skip to content
Advertising

A380- World's biggest super jumbo 3d Printed RC Plane

Airbus-A380-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
A380-RC-Airplane-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-Airbus.jpg A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-Side-Profile.jpg A380- World's biggest super jumbo 3d Printed RC Plane
World's-First-A380-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-with-Detailed-Assembly-Manual.png A380- World's biggest super jumbo 3d Printed RC Plane
A380-800-RC-Aircraft-by-AN-Engineering.png A380- World's biggest super jumbo 3d Printed RC Plane
A380-Design-by-AN-Engineering.png A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-800.jpg A380- World's biggest super jumbo 3d Printed RC Plane
A380-Super-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
Hinges TPU.stl A380- World's biggest super jumbo 3d Printed RC Plane
Wheel Hub For Retractable Landing Gear (50% Infill).stl A380- World's biggest super jumbo 3d Printed RC Plane
Tyre- Retractable Landing Gear.stl A380- World's biggest super jumbo 3d Printed RC Plane
Airbus-A380-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
A380-RC-Airplane-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-Airbus.jpg A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-Side-Profile.jpg A380- World's biggest super jumbo 3d Printed RC Plane
World's-First-A380-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-with-Detailed-Assembly-Manual.png A380- World's biggest super jumbo 3d Printed RC Plane
A380-800-RC-Aircraft-by-AN-Engineering.png A380- World's biggest super jumbo 3d Printed RC Plane
A380-Design-by-AN-Engineering.png A380- World's biggest super jumbo 3d Printed RC Plane
AN-Engineering-A380-800.jpg A380- World's biggest super jumbo 3d Printed RC Plane
A380-Super-by-AN-Engineering.jpg A380- World's biggest super jumbo 3d Printed RC Plane
Hinges TPU.stl A380- World's biggest super jumbo 3d Printed RC Plane
Wheel Hub For Retractable Landing Gear (50% Infill).stl A380- World's biggest super jumbo 3d Printed RC Plane
Tyre- Retractable Landing Gear.stl A380- World's biggest super jumbo 3d Printed RC Plane
Advertising
Make an offer
Share
Add to
Make
?
Creation quality: 4.1/5 (5 votes)
Evaluation of members on the printability, utility, level of detail, etc.
🏆 Best ?
License
Usages
3D design format
17 files (PDF, RAR, and STL) Close
  • AN Engineering A380-800 .pdf
  • Empennage_(LW-PLA)_(Profile_2).rar
  • EnginesA_(LW-PLA)_(Profile_1).rar
  • EnginesB_(PLA)_(Profile_3).rar
  • Fixed_Landing_Gear_(PLA)_(Profile_5).rar
  • FuselageA_(LW-PLA)_(Profile_1).rar
  • FuselageB_(PLA)_(Profile_3).rar
  • Hinges TPU.stl 57.0 × 55.0 × 0.8 mm
  • MiscellaneousA_(PLA)_(Profile_3).rar
  • MiscellaneousB_(PLA)_(Profile_4).rar
  • NOSE_Fixed_Landing_Gear_ (PLA)_(Profile_5).rar
  • Retractable_Landing_Gear_(PLA)_(Profile_5).rar
  • TPU_Parts_(Profile_6).rar
  • Tyre- Retractable Landing Gear.stl 12.0 × 35.0 × 35.000001 mm
  • Wheel Hub For Retractable Landing Gear (50% Infill).stl 12.0 × 15.0 × 14.992297 mm
  • WingsA_(LW-PLA)_(Profile_2).rar
  • WingsB_(PLA)_(Profile_3).rar

Learn more about the formats
Last update
Publication date
Design number 3649420
Design author anengineering
anengineering

anengineering

Certified account
Issue with this design? Report a problem.

10 comments

Add a comment

👉 Sign in to write a message

10 comments

anengineering
anengineering

Hi, it could be with the right print settings!
losevvasil
losevvasil

How much should a printed airplane weigh, just plastic?
losevvasil
losevvasil

My brother gave me this model on my birthday. Excellent work! I use PLA+ instead of PLA-LW with a 0.2 mm nozzle. This gave me better quality and strength at exactly the same weight.
Brockie1996
Brockie1996

Hi, do you have a guide for the assembly of the retractable landing gear please? main gears primarily if possible
nikolastoews
nikolastoews

Hi AN Engineering, Hey I've emailed you some things and I'm wondering if they are going to your spam folder?
Brockie1996
Brockie1996

Good evening,

i am just browsing through the free test files right now. about to print the test pieces to see how it turns out before purchasing the whole model. in the manual it says that the aircraft is printed in both PLA and LW-PLA. i have both materials. is there a diagram or a list of exactly which parts are printed with PLA and which are printed in LW PLA? Thank you

  • 1 like
anengineering
anengineering

Hi, thank you for your interest,
The parts that have to be printed in PLA or LW-PLA have been segregated into different folders. In the paid model, you can press the drop-down button to see the folders to get an idea. I hope this helps.

Regards,
AN Engineering

  • 1 like
Brockie1996
Brockie1996

Thank you for your reply and thank you for clearing that up. i am printing the tail section from the test files as we speak, i will be purchasing the rest of the model files soon! :)

carlodelpo
carlodelpo

not biggest 3d printed rc jumbo jet btw there is a Boeing 747-8I bigger than this one
nikolastoews
nikolastoews

Hi, hey i just downloaded these files but i'm not sure what orientation to print the fuselage and wings in?

  • 1 like
anengineering
anengineering

Hey Nikolas,
You need to print them vertically. I hope this helps.

Regards
AN Engineering

nikolastoews
nikolastoews

I think i know what you mean.

  • 1 like
anengineering
anengineering

Glad to hear that. If you have any questions reach out to me @anengineering023@gmail.com. Pictures are not supported here, but through mail I can send you screenshots.

Regards
AN Engineering

george-Y8KlO8KJ
george-Y8KlO8KJ

terrible files. A load of RAR files that will not open. Give me a refund

anengineering
anengineering

You can extract the files easily. It doesn't make sense to upload each and every stl and every designer who have many files to upload do this so that the files are organised in folders which makes it easy for the customer.
Cults also allows the upload of RAR files. I could help you out but if you are so disappointed I will initiate a refund right now.

george-Y8KlO8KJ
george-Y8KlO8KJ

Decompressing RAR files on a MAC is a pain. Don't worry about it. It might be easier for you but not your customer. Not everyone is on windows.

songandy
songandy

I use a Mac also and I could extract them out, go to google and search for https://www.ezyzip.com/. And it will work
soundstageinc
soundstageinc

Was waiting for this desperately, THANK YOU!! Time to start this build now..

george-Y8KlO8KJ
george-Y8KlO8KJ

Decompressing RAR files on a MAC is a pain. Don't worry about it. It might be easier for you but not your customer. Not everyone is on windows.

  • 1 like
anengineering
anengineering

I understand, I didn't know this. Do you want me to upload it in a .zip format so that you can open it on a mac?

george-Y8KlO8KJ
george-Y8KlO8KJ

No I will decompress all the files. Maybe a Mac based alternative would be helpful?

  • 1 like
anengineering
anengineering

I will do that for all my models, thanks for letting me know!

soundstageinc
soundstageinc

PSA - all files opened perfectly on my Mac and build is executing!

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 4 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 3 solutions accessible to all:

  • ADVERTISING: Disable your ad blocker.
  • DONATE: Make a donation via Ko-Fi Donate
  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site’s revenues are paid back to the platform’s makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.