1/155 Scale New Glenn

With the maiden launch of New Glenn fast approaching we're sure to witness a magnificent spectacle!

This model is roughly 1/155 scale and stands just below 63 centimeters (24.4 inches) in height and 7 cm in diameter (Including the aerodynamic surfaces).
The model is divided into 8 pieces, with 3 small cubes included to assist with part alignment during assembly. That way, multicolor printing or painting is not required.

In its default scale, the minimum printing size required is around 8x8x22cm (XYZ).
Model can be scaled or sliced as you wish.

DETAILS:

-All models were printed using a 0.4mm nozzle and 0.18 mm layer height, the color of each part is in their name.
-Supports are advised for all parts except the "Base" part, however the amount of supports required is minimal and they're easy to remove.
-You can adjust the infill and perimeter settings in your slicer depending on how much filament you want to use.
-Super glue will be required if you want to permanently join parts of the model

ASSEMBLING:

-The parts are stacked on top of each other in the following order:

-Engines (Inside Engine Bay)
-Alignment Cube (In between Engines and Engine Bay)
-Engine bay
-Alignment Cube (In between Engine Bay and First Stage Detail)
-First Stage Detail
-First Stage Bottom
-Alignment Cube (In Between First Stage Bottom and Top)
-First Stage Top

-Second Stage

-Payload Fairing

If you encounter any difficulties or issues during the prints or assembly let me know in the comment section and i'll do my best to help!