Mercedes C-Class W205 Android / Linux Display Bracket

This is a custom bracket for the 10.25" and 12.5" Android / Linux Displays.

With the file "[Standard] Bracket.stl", the display will sit lower for a much better look in comparison to the original chinese bracket. It's plug and play, you can change the original bracket with this one. "[Standard] Bracket.stl" is the recommended version to use in combination with the other [Standard] files:

• SidePart_left

• SidePart_right

• 2x SideScrew.

If you like it still lower than with the [Standard] version, you can use the [Lower 6mm] files which is 6mm lower than the [Standard] Bracket above and of course lower than the chinese original bracket.

There is also an individual version called [needs car modification]. No SideParts needed here.

The bracket also sits deeper to the windshield which is not possible without modifications.

This version can only be used with hardware modifications in you car. It's not recommended for casual users.

For more information how to use it send me a request.

0.20mm Layer hight ASA or ABS

you have to print the screw 2x