Apple iPhone 6 Plus & 6s Plus & 7 Plus & 8 Plus case

Originally published here on Thingiverse.

For the regular iPhone 6, 6s, 7, 8 and SE 2020, see this. This case was designed using as reference the iPhone 6S Plus, and a commercial case, that was compatible too with the iPhone 6 Plus, 7 Plus and 8 Plus. It was tested only with the first one, as it was the only one I had available to test, if this case does not fit correctly on any of the other phones, please, notify me and I will try to correct it, or remove its compatibility. This is not compatible with the (regular) iPhone 7, as I previously promote.

Some of the models are designed for rigid materials and others for flexible ones. The models materials are not interchangeable, so pay attention to the file names. If you have any request on the design just ask me.

For other phone cases check this.

Here is the explanation of the files names:

• Flex: made for elastic filaments like TPU. Tested on TPU the 7 Plus (thanks Marcelo Saiz.
• Rigid: made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA with the 6S Plus.
• Aired: It is widely opened in the back so that the phone can dissipate the heat easily.

-